288306
68
Zoom out
Zoom in
Previous page
1/83
Next page
Advanced Features
58
Advanced Features
Installing the USB driver
In the examples below the CD-ROM drive
letter is taken as “R:”. Select the correct drive
letter according to your operating environ-
ment.
Windows 98 SP1/98 SE
1 “Add New Hardware Wizard” appears
after performing “Preparation”.
2 Insert the CD-ROM containing the
USB driver into the CD-ROM drive,
then click “Next”.
3 Select “Search for the best driver for
your device.”, then click “Next”.
4 Select “Specify a location:”, and
specify “R:\USBDRV\WIN98”, then
click “Next”.
5 Check the message, then click “Next”
to begin installation.
6 Click “Finish” to complete the
installation.
Windows 2000 SP2
For installing the USB driver, you need to
log in as the system administrator.
1 “Found New Hardware Wizard”
appears after performing “Prepara-
tion”, then click “Next”.
2 Select “Search for a suitable driver for
my device”, then click “Next”.
3 Select “Specify a location”, insert the
CD-ROM containing the USB driver
into the CD-ROM drive, then click
“Next”.
4 Specify “R:\USBDRV\WIN2KXP”,
then click “OK”.
5 Check the message, then click “Next”
to begin installation.
6 Click “Finish” to complete the
installation.
Windows Me
1 “Add New Hardware Wizard” appears
after performing “Preparation”.
2 Select “Specify the location of the
driver”.
3 Insert the CD-ROM containing the
USB driver into the CD-ROM drive,
then click “Next”.
4 Select “Search for the best driver for
your device.” and “Specify a location.
5 Specify “R:\USBDRV\WINME” and
click “Next”.
6 Click “Finish” to complete the
installation.
Windows XP HE/PE
For installing the USB driver, you need to
log in as the system administrator.
1 “Found New Hardware Wizard”
appears after performing
“Preparation”.
2 Select “Install from a list or specific
location”.
3 Insert the CD-ROM containing the
USB driver into the CD-ROM drive,
then click “Next”.
4 Select “Search for the best driver in
these locations.” and “Include this
location in the search:”.
5 Specify “R:\USBDRV\WIN2KXP”, then
click “Next”.
6 Click “Finish” to complete the
installation.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ve cg 40 f at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ve cg 40 f in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info