288306
17
Zoom out
Zoom in
Previous page
1/83
Next page
7
Preparation
Preparation
Inserting and Removing
the AA Batteries
Before operation, you need to insert the
supplied AA (R6 or UM/SUM-3) alkaline
batteries.
Inserting
1 Make sure that the power is off.
2 Slide the battery compartment door
release to UNLOCK.
3 Slide the door, then open it in the
direction of arrow.
4 Insert the AA batteries as shown below.
5 Close the door, then slide the battery
compartment door release to LOCK.
Removing
Perform steps 1 to 3 in “Inserting”, then
remove the batteries.
Notes:
BEFORE REMOVING THE BATTERIES,
ALWAYS STOP OPERATIONS AND TURN THE
POWER OFF. Removing the batteries during
operation may destroy the card, rendering it
unreadable and unwritable.
• Remove the batteries from the camera if you will
not use the camera for a long period of time.
• Make sure that the battery compartment door
release is set to LOCK during operation. If it is
not, the batteries may fall out or camera
operation may fail because of poor contact
pressure.
• Do not use old and new batteries together or
batteries of different brand together.
• When the batteries are depleted, replace them
with new AA (R6 or UM/SUM-3) alkaline batteries
or fully charged Ni-MH rechargeable batteries
(commercially available).
Battery performance
The table below shows the approximate
number of recordable images when using
different types of batteries.
AA Alkaline (supplied)
Battery type
Approximate
number of images
Rechargeable Ni-MH
(1600 mAh)
100
200
Notes:
Images taken per usage, based on standard
testing.
Using the zoom (see page 15) and other
functions or turning the power on and off
frequently will increase power consumption.
This may result in a decrease in the actual
recording number compared to the numbers
listed above.
The number of images you can record with
commercially available batteries may differ from
the supplied AA alkaline batteries in the table
above.
Battery compartment
door release
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ve cg 40 f at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ve cg 40 f in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info