46289
40
Zoom out
Zoom in
Previous page
1/43
Next page
37
If problems persist contact the SHARP Helpline on tel: 0990-274277
TROUBLESHOOTING
TROUBLESHOOTING
AREA PROBLEM POSSIBLE CAUSE/CURE
RECORDING
Tape is automatically
ejected when pressing
REC ( ) or TIMER
ON/OFF buttons.
The record-protection tab has been removed.
VIDEOPLUS+ does not
record desired
programme.
Broadcast does not carry VPS/PDC signal which
alters recording time.
Check VPS/PDC mode is switched to ON.
Ensure date and time are correctly set on the
VCR.
TAPE
TRANSPORT/
MECHANISM
Tape can not be
loaded.
Make sure there is no other tape in the VCR.
Make sure you are loading the tape correctly.
Rewind is not possible. Make sure the tape is not at the start.
REMOTE
CONTROL
The VCR can not be
operated by remote
control.
Remote control is too far away from the main
unit.
Point the remote control at the VCR.
Batteries are flat - replace both.
Batteries have not been inserted correctly.
VCR is positioned in strong light.
OTHER
PROBLEMS
Picture does not
change even though
CHANNEL
/ buttons are
pressed.
Make sure the VCR is not in Timer or Menu
mode.
Desired channel
position can not be
selected.
The channel position has been set to be
skipped. Cancel the SKIP mode for that
channel.
No colour or poor TV
picture on normal
viewing.
Make sure all the cables are connected
properly.
Make sure the VCR power cord is properly
plugged in.
Not possible to view
picture or playback
through RF OUT.
Make sure the RF OUTPUT has not been switched
off. (Refer to note on RF THROUGH ON/OFF in
the TUNING THE TV TO THE VCR section of the
manual.)
Desired channel has
interference.
Possible weak signal strength, the same channel
with a better signal strength may have been
tuned in on another VCR preset channel.
Example;
VCR preset 1 = BBC1 and
VCR preset 14 = BBC1
(Refer to Manually Sorting Channels section to
move the channel to your desired position.)
TV aerial may need adjusting.
No picture appears. Make sure the TV is on the video channel.
Check all connecting cables.
TINS-3881 ENGLISH.BOOK Page 37 Wednesday, June 28, 2000 2:37 PM
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp VC-MH722LM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp VC-MH722LM in the language / languages: English as an attachment in your email.

The manual is 8,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info