Manual Sharp UX460 (page 96 of 152) (English)

16851

Zoom out

Zoom in

1/152

Press a number from 1 to 3 to select the ring pattern below that

matches your second number’s ring pattern. Or, press 4 to have your

fax automatically answer your normal telephone number. Press 5 to

turn off the distinctive ring function.

RING PATTERN 1: Two short rings.

RING PATTERN 2: One short, one long, and one short ring.

RING PATTERN 3: Two short rings and one long ring.

STANDARD RING: Your standard (normal) ring pattern.

OFF SETTING: Turn distinctive ring off.

The display will show:

FAX SIGNAL RX

Press the STOP key.

STOP

Set the reception mode to FAX.

When using distinctive ring, you must set the reception mode of your

fax to FAX. When your designated fax number is dialed, your fax will

automatically answer and begin reception after two rings. Note that

other devices on the same line will also ring until your fax answers. If

one of your other numbers is dialed, the fax will ring; however, it will

not answer.

Note: If you are using an answering machine with your distinctive ring

service, the answering machine must be connected to a separate wall jack.

Do not connect it directly to your fax.

RECEPTION

MODE

FAX

TEL

TAD

Distinctive Ring

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UX460 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp UX460 Manual

Product: