463411
319
Zoom out
Zoom in
Previous page
1/333
Next page
317
Data Saving or Loading (SD Card)
The POS terminal data can be saved to the SD memory card, and the programming data can be loaded
from the SD memory card.
To use the SD card function, select the “SD CARD” mode in the mode selection window and perform the
following operations.
Inserting and Removing an SD Memory Card
The SD card slot is located on the left side of your POS terminal and has a side cover.
Inserting an SD memory card
Insert an SD memory card into the SD card slot with the
printed SD logo facing upwards. Push the card in steady
with a finger until it clicks and release it slowly.
Removing the SD memory card
Push the card in gently with a finger and release it. The
card will Come out.
This model supports SD cards only. Use of any other types of SD cards such as mini SD, micro SD, etc.
with an adapter is not supported.
When inserting or removing the SD memory card, be sure to release it slowly. Otherwise, the card may
pop out and injure your finger.
Never touch or remove the SD memory card while it is accessed, otherwise the data stored in it may be
damaged.
Formatting the SD memory card erases all the data in it.
SD card formatting
When the SD card is not formatted yet, take the formatting operation.
(1) Select the [FORMATTING] menu in the SD CARD mode, the confirmation window is displayed.
(2) To perform the format operation, touch the [OK] key.
To cancel the operation, touch the [CANCEL] key.
Folder code programming
The programmed code is used the file folder structure. Up to 8 digits code can be programmed.
(1) Select the [FOLDER CONTROL] menu in the SD CARD mode, the folder code list window is
displayed.
(2) Select the required folder code from the list, and enter the [ENTER] key.
To approve the selected folder code, touch the [JOB SELECTION] key.
To cancel the operation, touch the [CANCEL] key.
11
319


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp UP-3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UP-3500 in the language / languages: English as an attachment in your email.

The manual is 6,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info