Manual Sharp UA-KIN40E (page 18 of 156) (English, German, Dutch, French, Italian, Polish, Spanish)

787867

Zoom out

Zoom in

1/156

EN-16

BACK PANEL /

SENSORS

Remove the dust gently with a cleaning

tool such as a vacuum cleaner.

Back Panel (Pre-Filter)

Sensors Sensors

NOTE

• Do not apply excessive pressure when

scrubbing the Back Panel.

NOTE How to clean hard to remove dirt.

Back Panel

1. Add a small amount

of kitchen detergent to

water and soak for about

10 minutes.

2. Rinse off the kitchen

detergent with clean

water.

3. Completely dry the filter

in a wellventilated area.

Back Panel

Sensor Filter

1. Remove the Back Panel.

2. Remove the Sensor

Filter.

3. If the Sensor Filter is very

dirty, wash it with water

and dry it thoroughly.

Sensor Filter

HEPA FILTER /

DEODORIZING FILTER

Remove the dust on the filters.

HEPA Filter

Clean only the tagged surface. Do not clean up the

opposite surface. The filter is fragile, so be careful

not to give too much pressure.

Tag

Deodorizing Filter

Both surfaces can be cleaned. The filter may be

broken if being too much pressure is applied on it,

so please handle it with care.

(Only UA-KIN40E) (Only UA-KIN50E)

NOTE

• Do not wash the filters. Do not expose to

sunlight. (Otherwise these filters may lose

efficacy.)

• Some odours absorbed by the filters will

break down over time, causing additional

odours. Depending on usage conditions,

and especially if the product is used in

environments significantly more severe than a

normal household, these odours may become

noticeable sooner than expected.

Replace the filter in those cases or if dust is

unable to be removed after maintenance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UA-KIN40E in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 9.63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp UA-KIN40E Manual

Product: