689336
19
Zoom out
Zoom in
Previous page
1/144
Next page
E-16
ENGLISH
TROUBLESHOOTING
Before contact for service, review the troubleshooting chart below to make sure that the problem is not a unit malfunction.
SYMPTOM REMEDY
(the following are not due to a malfunction)
Odour and smoke persists. Check the fi lters. If they appear to be extremely dirty, clean or replace them. (Ref.
E-15)
The Cleanliness Monitor is blue
even when the air is not clean.
• The air may have been dirty when the unit was plugged in. Unplug the unit, wait
one minute, and then plug the unit in again.
The Cleanliness Monitor light is
red even when the air is clean.
• Dirty or clogged dust(sensitive) sensor openings interfere with sensor operation.
Gently clean the sensor fi lter or the back panel. (Ref. E-13).
The unit makes a clicking or
ticking sound.
• The unit may make clicking or ticking sounds when it is generating ions.
Air discharged from the unit
has an odour.
• Check to see if the fi lters are extremely dirty.
• Clean or replace the fi lters. (Ref. E-13, E-14, E-15)
• Use only fresh tap water. Using other water sources risks the growth of mold,
fungi, or bacteria.
The unit does not operate when
cigarette smoke is in the air.
• Make sure the unit is installed in a location in which the sensors can detect cig-
arette smoke.
• Check to see if the dust(sensitive) sensor openings are blocked or clogged. If
they are blocked or clogged, clean the sensor fi lter or the back panel.
(Ref. E-13)
The FILTER RESET Indicator
Light is on.
• Whenever after performing maintenance or replacing the fi lters, connect the
power cord to an outlet and then press the Filter Reset Button. (Ref. E-13)
The Front Display is turned off. • When Light control is set to "Auto", the light automatically turns off when the
room is dark. Moreover, when Light control is set to "Turn off", the light is always
off. If you do not want the light to be off, set Light control to the "Darker" setting.
(Ref. E-11)
The Humidify Light on the
Front Display does not light up
when the tank is empty.
• The room has reached the appropriate level of humidity and has stopped hu-
midifying.
• Check the styrofoam fl oat for impurities. Clean the Humidifying Tray. Make sure
that the unit is on a level surface. (Ref. E-14)
The water level in the tank
does not decrease or decreas-
es slowly.
• Check to see if the Humidifying Tray and Water Tank are correctly installed.
Check the Humidifying Filter. (Ref. E-14)
• If the fi lter is extremely dirty, clean or replace it. (Ref. E-15)
The Cleanliness Monitor
changes colour frequently.
• The Cleanliness Monitor automatically changes colour when the dust (sensitive)
sensor and odour sensor* detect impurities. If you are concerned about the
change, you can change sensor sensitivity.
(Ref. E-11,E-12) (*UA-HG60E / UA-HG50E)
There is a discrepancy between
the unit’s Humidity Monitor
and another hygrometer in the
room.
• There is a difference in the humidity level within the same room.
• The sensor have different measurement parameters.
• If the monitor indicates wattage or temperature, switch the display by pressing
the DISPLAY SELECT button. (Ref. E-10)
The unit PM2.5 Light does not
match weather report or other
local PM2.5 data.
• Outdoor and indoor as well as the home environment (the volume of traffi c near-
by, number of stories in home, etc.) may cause a reading different than local
PM2.5 data.
"
o
C" Light fl ashing
• The room is suitable for viruses to survive due to low room temperature. We
recommend you adjust the temperature using heating appliances. (Ref. E-9)
• The room temperature and humidity is high. We recommend that you drink
some water or lower the room temperature. (Ref. E-10)
ERROR DISPLAY
If error occurs repeatedly, contact the Sharp Service Centre.
DIGITAL INDICATION REMEDY
Make sure that the Humidifying Filter and Humidifying Tray are
properly installed, and then turn the power to ON again.
Unplug the unit, wait one minute, and then plug the unit in again.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp UA-HG50E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UA-HG50E in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp UA-HG50E

Sharp UA-HG50E User Manual - Italian - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info