689338
13
Zoom out
Zoom in
Previous page
1/172
Next page
E-9
ENGLISH
OPERATION
STOP
About Automatic Humidify Mode
The Temperature/Humidity sensors automatically detect and adjust
humidity according to changes in room temperature. Depending on
the size and humidity of the room, humidity may not reach 55~65
%. In such cases, it is recommended that CLEAN AIR HUMIDIFY/
MAX MODE be used.
CLEAN AIR HUMIDIFY
Temperature Humidity
~18 ºC 65 %
18 ºC~24 ºC 60 %
24 ºC~ 55 %
Using to quickly clean the air, reduce odours and to humidify.
The louver opens and the unit starts the operation
automatically.
Select the desired fan speed. (Ref. E-10)
Unless the power cord has been unplugged, the operations
starts in the previous mode it was operated in.
NOTE
Fill the Water Tank. (Ref. E-8)
When the Water Tank is empty, the unit will operate in
“CLEAN AIR MODE” and
is fl ashing (red).
lights in (green) during operation of humidifi cation.
START
STOP
CLEAN AIR
Using when additional humidity is not required.
The louver opens and the unit starts the operation
automatically.
Select the desired fan speed. (Ref. E-10)
Unless the power cord has been unplugged, the operations
starts in the previous mode it was operated in.
START
START
CLEAN ION SHOWER
The louver opens and the unit starts the operation automati-
cally.
If the “Plasmacluster Ion ” is OFF,
the plasmacluster ion will be not released.
When the operation nishes, the unit will return to the prior
operation mode.
It is possible to switch this mode to another while operating.
However, the CLEAN ION SHOWER mode will not function
after switching mode.
The unit releases Plasmacluster ions with the maximum air
ow and collects dusts while decreasing static electricity for
10 minutes. After that, the unit operates while humidifying
with strong air fl ow for 50 minutes.
The unit stops humidifying and the Humidify Light will turn
off once humidity reaches a proper level.
When the Water Tank is empty, the Humidify Light is ash-
ing (red) and the unit will operate without humidifying.
Releases high-density Plasmacluster
ions and discharges strong air fl ow for
60 minutes.
NOTE
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp UA-HD60E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UA-HD60E in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info