Manual Sharp TUGD10UT (page 27 of 106) (English, French, Portuguese, Spanish)

34019

Zoom out

Zoom in

1/106

Watching TV

Changing channels - Analog-TV

You can change channels in several ways.

NOTE

• While watching a broad cast, press A-ANALOG-B to view

the image received from the other tuner.

Method 1

Using CHr/s on the remote control unit or on the

display.

Method 2

1. Press FLASHBACK to switch to the previously tuned

channel.

2. Press FLASHBACK again to switch back to the

currently tuned channel.

NOTE

• FLASHBACK will not work if no channel has been

changed after TV is turned on.

Method 3

Using remote control buttons (0-9 and ENTER) to select

up to 125 channels for VHF/UHF/CATV.

To select a 1 or 2-digit channel number

(e. g., Channel 5):

Press 5s ENTER

NOTE

• When selecting a 1-digit channel number, it is not

necessary to press 0 before the number.

• When you enter 0-9 only, channel selection will be made

if there is no operation for a few seconds.

• • (DOT) can be used instead of ENTER.

To select a 3-digit channel number

(e. g., Channel 115):

Press 1s1s5

NOTE

• When you enter 0-9 only, channel selection will be made

if there is no operation for a few seconds.

• If you push “0” by itself, nothing will happen.

Changing channels - Digital-TV

You can change channels in several ways.

As well as the methods outlined below, you can also select

programs using the Channel List. (See page 89.)

NOTE

• While watching a broad cast, press DIGITAL.

■ Digital - Air (Two-part Number)

Method 1

When you press CHr/sor FLASHBACK, repeat the

same steps for Analog-TV.

Method 2

Using remote control buttons (0-9, • (DOT) and

ENTER) to select the channels including a decimal

point.

To select a 4-digit channel number

(e. g., Channel 22.1):

Press 2 s2s•(DOT) s1s ENTER

NOTE

• Complete the above steps within a few seconds.

• When you enter 0-9 and •(DOT), channel selection will

be made if there is no operation for a few seconds.

■ Digital - Cable (One-part Number)

Method 1

When you press CHr/sor FLASHBACK, repeat the

same steps for Analog-TV.

Method 2

Using remote control buttons (0-9 and ENTER) to select

the channels including a decimal point.

To select a 3-digit channel number

(e. g., Channel 310):

Press 3s1s0sENTER

NOTE

• When you enter 0-9 only, channel selection will be made

if there is no operation for a few seconds.

ANALOG-A Air

ANALOG-B Cable

115

ANALOG-B Cable

22.

DIGITAL Air DIGITAL Air

22.122.1

DIGITAL Air

310

DIGITAL Cable

310

DIGITAL Cable

Please note: your new AQUOS Liquid Crystal Television is capable of receiving the full range of cable-TV channels available

today, from the most advanced digital and HDTV channels, to the more traditional analog channels. As the transition toward

full digital TV continues, some cable-TV systems in the USA will have a mixture of analog and digital channels in their

lineups. When you are viewing analog cable-TV channels and wish to switch to viewing digital cable-TV channels, you must

press the DIGITAL button (located just below the numbers) on the remote control first. In similar fashion, when you are

viewing digital channels and wish to switch to viewing analog channels, you must press either the ANALOG-A or ANALOG-

B button (depending on whether you have your cable connected to the A or B terminal) on the remote first.

LC-45GX6U(E)-020-029 04.7.8, 8:43 AM26

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp TUGD10UT in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp TUGD10UT Manual

Product: