34019
21
Zoom out
Zoom in
Previous page
1/106
Next page
20
Watching TV
Simple operations for watching a TV program
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the AVC System.
1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (Commercially available).
2. A 300-ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300/75-ohm
adapter (Commercially available).
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
Be sure to connect the antenna or the cable converter as follows. Signal reception may fail if improperly connected.
Be sure to remember what kind of connection is made with your System.
The connection type will determine whether to select “Air” or “Cable” for both ANALOG-A and B when configuring “Air/
Cable” settings.
Cable TV/VCR connection
VIDEO AUDIO OUT IN
Coaxial Antenna Cable (commercially available)
VCR
Video Cable (commercially available)
Audio Cable (commercially available)
Coaxial Antenna Cable
(commercially available)
Cable lead-in
Cable TV converter
(commercially available)
OUT IN
Signal splitter
(commercially
available)
Coaxial Antenna Cable (commercially available)
Coaxial Antenna Cable (commercially available)
Rear Terminals
A-1. Connecting with cable TV Converter and VCR
NOTE
Be sure to remember what kind of connection is made with your System.
Shown here is the preferred method of connecting a VCR and CATV Converter to your System if you are in an area with
good signal reception. This way you can view either TV programs or VCR tapes and not be concerned about the position
of the VCR’s TV/VCR switch and you can enjoy stereo tape playback from a stereo VCR.
While in Standby, no signal is output from ANALOG-A OUT.
LC-45GX6U(E)-020-029 04.7.9, 7:23 AM20
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp TUGD10UT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp TUGD10UT in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info