647075
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
OtHer features
COntrOl lOCk
The Control Lock prevents unwanted drawer operation such
as by small children. The Microwave Drawer can be set so
that the control panel and the automatic door mechanism are
deactivated or locked.
TO LOCK
Touch STOP/CLEAR pad and hold for 3 seconds. The
display shows
LOCK ON
.
TO UNLOCK
Touch STOP/CLEAR pad and hold for 3 seconds. The
display shows
LOCK
OFF
.
The Control Lock is canceled when the electrical power supply
to your oven is interrupted. Set the Control Lock again when
power to the oven is restored.
Help
Each setting of REHEAT, COOK, POPCORN, KEEP
WARM, REHEAT and DEFROST has a cooking hint. If you
wish to check, touch HELP/SETTINGS whenever HELP is
lighted in the Interactive Display for these and other manual
operation hints.
+30 seC
+30 SEC allows you to cook for 30 seconds at 100% by
simply touching the +30 SEC pad. You can also extend
cooking time in multiples of 30 seconds by repeatedly
touching the +30 SEC pad during manual cooking.
Note:
To use +30 SEC, touch pad within 3 minutes after cooking,
closing the drawer or touching the STOP/CLEAR pad.
+30 SEC cannot be used with Sensor settings, REHEAT
or DE F ROST.
Multiple sequenCe COOking
Your Microwave Drawer can be programmed for up to 4
automatic cooking sequences, switching from one power
level setting to another automatically.
Sometimes cooking directions tell you to start on one
power level and then change to a different power level. Your
Microwave Drawer can do this automatically.
1 First enter cooking time. Then touch POWER LEVEL
pad once for 100% cooking or repeat touching POWER
LEVEL pad for a lower power level.
2 Enter second cooking time. Repeat touching POWER
LEVEL pad for desired level. You can follow this procedure
up to 4 times.
TOUCH
START
3 Touch START/+30 SEC pad.
Note:
If POWER LEVEL pad is touched once,
HIGH
will
be displayed.
If 100% is selected as the nal sequence, it is not necessary
to touch the POWER LEVEL pad.
If you wish to know power level during cooking, simply
touch the POWER LEVEL pad. As long as your nger is
touching the POWER LEVEL pad, the power level will
be displayed.
Keep Warm can be programmed even if 4 cooking
sequences have been set.
MOre Or less tiMe aDjustMent
Should you discover that you like any of the REHEAT or
DEFROST settings slightly more done, touch the POWER
LEVEL pad once after touching your selection. The display
will show
MORE
.
For slightly less done, touch the POWER LEVEL pad twice
after touching your selection. The display will show
LESS
.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SMD2470AS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SMD2470AS in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info