Manual Sharp SJ-X300 (page 5 of 44) (English, German, French, Italian, Spanish)

787258

Zoom out

Zoom in

1/44

EN-3

1 Keep adequate ventilation space around the

refrigerator.

The picture shows the minimum required space for

installing the refrigerator. The measurement condition

of energy consumption is conducted under a different

space dimension.

Installation Free standing type

2 Use the adjustable foot to place the refrigerator atly

and rmly on the oor.

Adjustable foot

Note

• Place your refrigerator to access the plug.

• Keep your refrigerator out of direct sunlight and do not

place next to heat generating appliance.

• Do not place your refrigerator directly on the ground.

Insert suitable stand such as wooden board under the

refrigerator.

Before using your refrigerator

Clean the inside parts with a cloth soaked in warm water.

If soapy water is used, wipe it off thoroughly with water.

Rear clearance

The space between the rear of the refrigerator and the

wall should be 50mm or more, and less than 75mm. If

the space is wider than 75mm, you may get injured by

touching compressor and its peripheral parts which are

extremely hot during the operation.

Note

• By keeping greater space, the refrigerator may consume

a less amount of power consumption.

• If use the refrigerator in the smaller space dimension

than gured, it may cause temperature rise in the unit,

loud noise and failure.

• Do not push the refrigerator against the wall. The wall

surrounding the refrigerator may get dirty or discolored

because of the air ow caused by heat radiation.

Overall space required in use

90mm

or more

60mm

or more

60mm

or more

1113

980

90 mm or

60 mm or

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SJ-X300 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 8.1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp SJ-X300 Manual

Product: