787129

Sharp SJ-UF103M4W Manual

9
Zoom out
Zoom in
Previous page
1/136
Next page
EN -8-
CHAPTER -3: USING YOUR FREEZER
Accessories
Ice tray (In some models)
• Fill the ice tray with water and place in freezer compartment.
• After the water completely turned into ice, you can twist the tray as shown below to get the ice cube.
Cleaning
• Before cleaning your freezer, turn your mains supply off and remove the plug from the socket.
• Do not wash your freezer by pouring water on to it.
• Use a warm, soapy cloth or sponge to wipe the interior and exterior of your freezer.
• Carefully remove all baskets by sliding upwards or outwards and clean with soapy water. Do not wash in a
washing machine or dishwasher.
• Do not use solvents, abrasive cleaners, glass cleaners or all purpose cleaning agents to clean your freezer. This
may cause damage to the plastic surfaces and other components with the chemicals they contain.
• Clean the condenser at the back of your freezer at least once a year with a soft brush or vacuum cleaner.
Make sure that your freezer is unplugged while cleaning.
The Plastic Scraper (In some models)
After some time, frost will build up in certain areas of the freezer. The frost accumulated in the freezer
should be removed regularly. Use the plastic scraper provided, if necessary. Do not use sharp metal
objects for this operation. They could puncture the refrigerator circuit and cause irreparable damage
to the unit.
Defrosting
Freezer defrosting process
• Small amounts of frost will accumulate inside the freezer, depending on the length of time the door may be
left open or the amount of moisture introduced. It is essential to ensure that no frost or ice is allowed to form
in places where it will affect the close tting of the door seal. This might allow air to penetrate the cabinet,
encouraging continuous running of the compressor. Thin frost formation is quite soft and can be removed with a
brush or plastic scraper. Do not use metal or sharp scrapers, mechanical devices or other means to accelerate
the defrosting process. Remove all dislodged frost from the cabinet oor. It is not necessary to switch off the
appliance for the removal of thin frost.
• For the removal of heavy ice deposits, disconnect the appliance from the mains supply, empty the contents into
cardboard boxes and wrap in thick blankets or layers of paper to keep cool. Defrosting will be most effective
if carried out when the freezer is nearly empty and should be carried out as quickly as possible to prevent an
unnecessary increase in the temperature of the contents.
• Do not use metal or sharp scrapers, mechanical devices or other means to accelerate the defrosting process.
An increase in temperature of frozen food during defrosting will shorten the storage life. Keep contents well
wrapped and cool while defrosting is taking place.
• Dry the inside of the compartment with a sponge or a
clean cloth.
• To accelerate the defrosting process, place one or
more bowls of warm water in the freezer compartment.
• Examine the contents when replacing them in the
freezer and if some of the packages have thawed out,
they should be eaten within 24hours, or be cooked and
re-frozen.
• After defrosting is complete, clean the inside of the
appliance with a solution of warm water and a little
bicarbonate of soda, then dry thoroughly. Wash all
removable parts in the same way and reassemble.
Reconnect the appliance to the mains supply and
leave for 2 to 3 hours on setting number '5' before
introducing the food back into the freezer.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SJ-UF103M4W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SJ-UF103M4W in the language / languages: English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info