787255
11
Zoom out
Zoom in
Previous page
1/156
Next page
EN -10-
CHAPTER -3: USING YOUR FRIDGE FREEZER
Accessories
Icematic (In some models)
Take out the ice making tray
Fill the water to the line.
Place the ice making tray in its original position
When ice cubes are formed, twist the lever to drop ice cubes into the icebox.
Note:
Do not ll the icebox with water in order to make ice. It may be broken.
The movement of the ice maker may be di󰀩cult while the refrigerator is running. In such a case, it should be
cleaned after removing the glass shelves.
Removing the ice maker
Take out the glass shelves of freezer compartment
Remove the icemaker by moving it to left or right on the shelf.
You can remove the icemaker to create a larger volume of the freezer compartment.
Zero Degree Zone (In some models)
Keeping food in the Chill Drawer instead of the freezer or refrigerator compartment
allows food retain freshness and avour longer while preserving its fresh appearance. If
the Chill Drawer tray becomes dirty, remove it and wash with water.
(Water freezes at 0 °C, but foods containing salt or sugar require lowered temperatures
to freeze)
Normally people use the Chill Drawer for raw sh, rice, etc...
Do not put foods you want to freeze or ice trays in order to make ice.
Removing the Chill Drawer
Pull the Chill Drawer out toward you by sliding it on rails.
Pull the Chill Drawer up from the rail to remove.
After the Chill Drawer has been removed, it can support a maximum 20 kg load.
Fresh dial
If you want to keep your vegetables longer in that compartment, you have
to change the humidty controller that is located at the front of the crisper,
to closed position. With the aid of this function, humidty level in the crisper
compartment, will stay constant and vegetables will last longer.
If you want to keep your vegetables colder in that compartment, you have to
change the humidity controller to open position. By doing this change, you will
allow the cold air to enter the crisper compartment. As a result of this, your
vegetables will be colder.
If you see any condensation on the glass shelf that is located at the top of crisper, you can change the humidity
controller to open position.
CHAPTER -3: USING YOUR FRIDGE FREEZER
Adapti-Lift door shelf (In some models)
Six di󰀨erent height adjustments can be made to provide storage
areas that you need by Adapti-Lift.
To change the position of Adapti-Lift ;
Hold the bottom of the shelf and pull the buttons on the side of
the door shelf direction of arrow (Fig.1)
Position door shelf the height you need by moving up and down.
After you get the position that you want the door shelf, release
the buttons on the side of the door shelf (Fig.2) Before releasing
the door shelf, move up down and make sure the door shelf is
xed
Note: Before moving door shelf is loaded, you must hold the shelf by supporting the bottom. Otherwise, door shelf
could fall o󰀨 the rails due to the weight. So damage may occur on the door shelf or rails.
Fig.1
Fig.2
Visual and text descriptions on the accessories section may vary according to the model.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SJ-TE400E0S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SJ-TE400E0S in the language / languages: English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info