655032
4
Zoom out
Zoom in
Previous page
1/7
Next page
9
ENGLISH
Plasmacluster
The plasmacluster automatically starts operating when the
refrigerator is powered on.
To cancel operation
Press the " " button (The light turns off).
To start operation
Press the " " button again.
Controlling temperature
The refrigerator controls its temperature automatically.
However, if needed, adjust the temperature as follows.
Refrigerator compartment
Adjustable between 0°C and 6°C in steps of 1°C.
1
Press the select button.
2
Press the / button and set the temperature.
[ : increase, : decrease ]
3
Press the " " button.
Freezer compartment
Adjustable between -13°C and -21°C in steps of 1°C.
1
Press the select button.
2
Press the / button and set the temperature.
[ : increase, : decrease ]
3
Press the " " button.
Door Alarm
When the refrigerator or freezer door is left open, the door
alarm will sound.
The door alarm will sound 1 minute after opening the
door and again after 1 minute (once in each case).
If the door is left open for approx. 3 minutes, the alarm
will sound continuously.
To cancel alarm signal
Press the select button continuously 3 seconds or more while
holding down the " " button.
It is the same method also when restarting the alarm signal.
OPERATION
1. Display for temperature setting
The preset temperature of compartment selected is
displayed. It is not an actual temperature in the
compartment.
2. Display for compartment selected
3. Select button
The compartment selected can be changed by pressing
the select button.
4. / button
Use to select temperature.
5. button
Finalizes the temperature setting.
6. Plasmacluster button and display
Press to start / cancel the plasmacluster operation.
NOTE
The display for temperature setting and selected
compartment will turn off when there is no operation for
1 minute. (When either of buttons is pressed, it lights
again.)
The plasmacluster display stays alight.
Control panel
Press the
select button
Initial display for
refrigerator compartment
Initial display for
freezer compartment
Notes about PLASMACLUSTER operation
The ionizer inside your refrigerator releases clusters of
ions, which are collective masses of positive and negative
ions, into the freezer and refrigerator compartments.
These ion clusters inactivate airborne mold fungus.
There may be a slight odors in the refrigerator. This is the
smell of ozone generated by the ionizer. The amount of
ozone is minimal, and quickly decomposes in the
refrigerator.
mold
fungus
lighting
lighting
It shows the door alarm stop.
(A791-2)Eng.fm Page 9 Friday, October 5, 2007 10:56 AM
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SJ-PT521R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SJ-PT521R in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info