564741

Sharp SJ-FS820V Manual

14
Zoom out
Zoom in
Previous page
1/308
Next page
14
Detection lever
The volume of ice cubes are
checked periodically by the
detection lever.
Ice cube volume will decrease when
the ice cubes are not smoothed.
AUTOMATIC ICE MAKER
Water tank
(Approx. 1.8 L)
Shovel
Ice storage box
Noise-prevention
sheet
To turn down the
dropping sound of ice
cubes.
Do not throw away
this sheet.
Ice storage area
Stored ice cube volume (Maximum)
Normal size ice : Approx. 232 pcs.
Large size ice : Approx. 112 pcs.
Food area
Store the small
frozen food.
How ice cubes are made
Water supply
Water is sent from the water ●
tank to the ice tray.
Ice making
Ice cubes are made. ●
(8 pieces at one time)
The number of ice cubes ●
per cycle may sometimes
change.
Releasing
Ice tray rotates, releasing ●
the ice and returns to “Water
supply”.
The ice tray will not rotate ●
when the ice storage box is
full.
<Refrigerator compartment>
Water tank
Pump
Pipe
Ice tray
Detection
lever
Ice storage
box
<Freezer compartment>
Detection
lever
Full volume
(About half the volume)
Kinds of ice making mode
There are 5 modes you can choose as shown below.
The size or the clarity of ice cube differs according to the selected mode.
Mode Icon Ice size Clarity of ice
Required time
for each ice making
Ice making OFF
[
Normal ice
[
Normal Normal Approx.2 hours
Large ice
[
Large Normal Approx.3 and a half hours
Clear ice
(Normal size)
[
Normal High Approx.6 hours
Clear ice
(Large size)
[
Large High Approx.8 hours
NOTE
2 types of ice cube are made at the same time.•
Cube Multifaceted shape
More than one mode cannot be selected at one time. •
The ice making time as shown above is only a rough indication at •
the ambient temperature of 30°C, the temperature adjustment set
to Med, Energy saving turned off, and with no opening or closing
of the doors.
Ice making right after changing the mode
The fi rst batch of ice cubes made right after changing the •
operating mode does not refl ect the change in size or clarity. This
is because there are still half-made ice cubes left in the ice tray
when switching to the changed mode. Ice cubes of the 2nd batch
or later will refl ect the mode change.
Ice making takes longer when:
The room temperature is high.•
Less cooling operation, e.g. in winter.•
Many food products are stored.•
Refrigerator is defrosting.•
The door is frequently opened.•
When you restart the ice making operation.•
Energy saving mode is in operation.•
The clarity of clear ice is declined
under the following conditions
Ice making is carried out for the fi rst time.•
Large amount of food is stored in the other compartments.•
Energy saving or Express freezing is in operation. •
The temperature is set higher or lower than the initial temperature •
adjustment. (Refrigerator : 3°C, Freezer : -18°C)
Ice tray
Ice tray is located at
the upper section in
the back.
(Unremovable)
(B423)W_1.indb 14(B423)W_1.indb 14 2013/04/18 18:24:382013/04/18 18:24:38
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SJ-FS820V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SJ-FS820V in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 9,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info