787215

Sharp SJ-BB05DTXWF Manual

9
Zoom out
Zoom in
Previous page
1/16
Next page
EN -8-
CHAPTER -3: USING YOUR FRIDGE FREEZER
Accessories
Adapti-Lift Door Shelf (In some models)
Six different height adjustments can be made to adapt the space
to your needs.
To change the position of Adapti-Lift ;
Hold the bottom of the shelf and pull the buttons on the side of
the door shelf direction as indicated. (Fig.1)
Position door shelf to the required height by moving up or down.
Once the shelf is in the required position, release the buttons on
the side of the door shelf (Fig.2) Before releasing the door shelf,
move it up down and make sure the door shelf is xed
Note: Before moving a loaded door shelf, you must hold the shelf by supporting the bottom. Otherwise, the door shelf
could fall off the rails due to the weight.
Fig.1
Fig.2
Adapti-Shelf (In some models)
The ADAPTI-Shelf mechanism provides higher storage spaces with a
simple movement.
• To cover the glass shelf, push it. (Fig. 1)
• You can place your food as you lilke in the resulting extra space.
(Fig. 2)
• To bring the shelf to its original position, pull it towards you. (Fig.
1)
Fig. 1 Fig. 2
The Fresh Dial (In some models)
If the crisper is full, the fresh dial located in front of the crisper should be opened. This
allows the air in the crisper and the humidity rate to be controlled, to increase the life
of food within.
The dial, located behind the shelf, must be opened if any condensation is seen on the
glass shelf.
Fresh dial
Visual and text descriptions on the accessories section may vary according which model you have..
Temperature indicator
In order to help you better set your refrigerator, we have equipped it with a temperature indicator located in
the coldest area.
To better store the food in your refrigerator, especially in the coldest area, make sure the message “OK”
appears on the temperature indicator. If « OK » does not appear, this means temperature has not been set
properly
It may be difcult to see the indicator, make sure it is properly lit.Each time the temperature setting device is
changed, wait for the stabilisation of the temperature inside the appliance before proceeding, if necessary,
with a new temperature setting. Please change the position of the temperature setting device progressively
and wait at least 12 hours before starting a new check and potential change.
NOTE: Following repeated openings (or prolonged opening) of the door or after putting fresh food into the appliance,
it is normal for the indication “OK” not to appear in the temperature setting indicator. If there is an abnormal build up
of ice crystals of ice crystals (bottom wall of the appliance) on the refrigerator compartment, evaporator (overloaded
appliance, high room temperature, frequent door openings), put the temperature setting device on a lower position until
compressor off periods are obtained again.
Store food in the coldest area of the refrigerator.
Your food will be better stored if you put it in the most appropriate cooling
area. The coldest area is just above the crisper.
The following symbol indicates the coldest area of your refrigerator.
To be sure to have a low temperature in this area, make sure the shelf is
located at the level of this symbol, as shown in the illustration.
The upper limit of the coldest area is indicated by the lower side of the sticker (head of
the arrow). The coldest area upper shelf must be at the same level with the arrow head.
The coldest area is below this level.
As these shelves are removable, make sure they are always at the same level with these
zone limits described on the stickers, in order to guarantee temperatures in this area.
Ice tray
• Fill the ice tray with water and place in the freezer compartment.
• After the water has completely turned into ice, you can twist the tray as shown below to get the ice cube.
OK
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SJ-BB05DTXWF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SJ-BB05DTXWF in the language / languages: English as an attachment in your email.

The manual is 2.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info