Manual Sharp SJ-BA31IEWGE (page 15 of 172) (English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Norwegian, Finnish)

787046

Zoom out

Zoom in

1/172

EN -14-

CHAPTER -6: TROUBLESHOOTING

If your fridge is not operating;

• Is there a power failure?

• Is the plug connected to the socket correctly?

• Is the fuse of the socket to which the plug is connected or the main fuse blown?

• Is there any failure at the socket? To check this, plug your refrigerator into a known working socket.

If your fridge is not cooling enough;

• Is the temperature adjustment right?

• Is the door of your fridge opened frequently and left open for a long while?

• Is the door of fridge closed properly?

• Did you put a dish or food on your fridge so that it contacts the rear wall of your fridge so as to prevent the air

circulation?

• Is your fridge lled excessively?

• Is there adequate distance between your fridge and the rear and side walls?

• Is the ambient temperature within the range of values specied in the operating manual?

If the food in your refrigerator compartment is over cooled

• Is the temperature adjustment right?

• Are there many food recently put inside the freezer compartment? If so, your fridge may over cool the food

inside the refrigerator compartment as it will operate longer to cool these food.

If your fridge is operating too loudly;

To maintain the set cooling level, compressor may be activated from time to time. Noises from your fridge at this time

are normal and due to its function. When the required cooling level is reached, noises will be decreased automatically.

If the noises persist;

• Is your appliance stable? Are the legs adjusted?

• Is there anything behind your fridge?

• Are the shelves or dishes on the shelves vibrating? Re-place the shelves and/or dishes if this is the case.

• Are the items placed on your fridge vibrating?

Normal Noises;

Cracking (Ice cracking) Noise:

• During automatic defrosting.

• When the appliance is cooled or warmed (due to expansion of appliance material).

Short cracking: Heard when the thermostat switches the compressor on/o󰀨.

Compressor noise (Normal motor noise): This noise means that the compressor operates normally Compressor

may cause more noise for a short time when it is activated.

Bubbling noise and splash: This noise is caused by the ow of the refrigerant in the tubes of the system.

Water ow noise: Normal ow noise of water owing to the evaporation container during defrosting. This noise

can be heard during defrosting.

Air Blowing Noise (Normal fan noise): This noise can be heard in No-Frost fridge during normal operation of

the system due to the circulation of air.

ERROR TYPE MEANING WHY WHAT TO DO

LC "Refrigerator comp.

Not Cold enough"

Ideal temperature for Ref.

Compartment is +4 oC. If

you see this warning your

foods have risk of spoiling.

1. Set the refrigerator temperature to

colder values or set the super cooling

mode until the compartment gets to

normal temperature.

2. Do not open the door much until this

failure is o󰀨.

LF and LC "not cold enough

Warning" It is the combination of LF

and LC Error type

You will see this failure when rst starting

the appliance. It will be o󰀨 after the

compartments gets normal temperature

HC Refrigerator comp.

too Cold

The foods starts to freeze

because of the too much

cold temperature

1. Check if the “Super cooling mode”

is on

2. Decrease the refrigerator temperature

values

LOPO "Low voltage

Warning"

When the power supply

gets lower than 170 V the

appliance gets to steady

position.

This not a failure. This prevents any

damages on the compressor. This

warning will o󰀨 after the voltage gets

required level

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SJ-BA31IEWGE in the language / languages: English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11.59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp SJ-BA31IEWGE Manual

Product: