360129
2
Zoom out
Zoom in
Previous page
1/92
Next page
2
ENG
INTRODUCTION
Thank you very much for buying this SHARP product.
Before using your SHARP refrigerator, please read this
operation manual to ensure that you gain the maximum
benefit from it.
All persons using the cabinet must be thoroughly familiar
with its operation and safety features. Keep this operation
manual with the refrigerator if you move or if the cabinet
changes owners so that whoever uses it can read about
the various features and safety rules.
Important:
This refrigerator is for domestic use only, with an ambient
temperature between +5°C and +38°C.
The refrigerator should not be subjected to temperatures
of -10°C for long periods.
To be used on 220-240V mains voltage.
WARNING
1.This refrigerator contains flammable refrigerant
(R600a: isobutane) and insulation blowing gas
(cyclopentane). Observe the following rules to prevent
ignition and explosion.
The refrigeration system behind and inside the
refrigerator contains refrigerant. Do not allow any
sharp objects to come into contact with the
refrigeration system.
Do not use mechanical devices or other means to
accelerate the defrosting process. (This refrigerator
has adopted automatic defrosting system.)
Do not use electric appliances inside the refrigerator.
Use only the specified lamp for the refrigerator
compartment.
Do not block the openings on the circumference of the
refrigerator.
If the refrigeration system should get punctured, do not
touch the wall outlet and do not use open flames. Open
the window and air out the room. Then ask a service
agent approved by SHARP for servicing.
This refrigerator should be disposed appropriately.
Take the refrigerator to a recycling plant for flammable
refrigerant and insulation blowing gases.
2.This refrigerator is airtight. TO PREVENT FATAL
ACCIDENTS TO CHILDREN, please completely
remove the door prior to discarding the refrigerator.
3.Highly volatile and inflammable materials such as
ether, petrol, propane gas, adhesive agents and pure
alcohol etc. are liable to explode. Do not store these
materials in the refrigerator.
4.To prevent damage to the outer cabinet, avoid contact
with lacquer, and paint, etc.
5.When cleaning your refrigerator, do not splash water
directly on the outer cabinet or the interior. This may
lead to rusting and deterioration of the electrical
insulation.
6.When cleaning any areas adjacent to electrical
components, unplug the refrigerator first to prevent
electric shock.
7.Should electrical components be accidentally
immersed in water, unplug the refrigerator, dry the
parts and contact your nearest service agent approved
by SHARP.
8.When disconnecting the power plug, do not touch the
pin of plug. This may cause electric shock.
9.This refrigerator is designed solely for the purpose of
storing foodstuff for domestic use in accordance with
the instructions given in this manual. Using the
refrigerator for other purposes might be harmful to
persons or property.
10.This refrigerator is not suitable for the storage of
materials requiring precise temperatures. Deterioration
of these materials will be dangerous.
11.Dust deposited on the power plug may cause fire. Wipe
it off carefully.
12.Do not attempt to change or modify this refrigerator.
This may result in fire, electric shock or injury.
CAUTION
1.Do not touch the compressor unit or its peripheral
parts, as they become extremely hot during operation
and the metal edges may cause injury.
2.If the power supply is accidentally disconnected,
please wait for at least 5 minutes before re-connecting
the power, as back pressure in the compressor may
trip the overload relay.
3.Do not touch foods or metal containers in the freezer
compartment with your wet hands. This may cause
frostbite.
4.To prevent accidental power disconnection, plug the
refrigerator directly to the source. Do not use a double
adaptor as loss of power could lead to the spoiling of
the stored food.
5.Do not place bottles in the freezer as they may crack
when frozen.
6.Keep the door securely closed. If the door is left ajar,
the controlled inner temperature will rise, resulting in
food spoilage and increase in electricity costs.
7.Do not install the refrigerator in a damp or wet location
as this may cause damage to the insulation and a leak.
Condensation may also build on the outer cabinet and
cause rust.
8.When installing or moving the refrigerator, make sure
that you do not nip or kink the power cord. Damage of
the power cord may cause electric shock or fire.
9.Do not use this refrigerator when the power cord or
plug is damaged, or the outlet attachment is loose, as
they may cause electric shock or fire.
10.Disconnect from the mains electricity supply by
removing the mains plug from the electricity supply
socket. Do not remove by pulling the mains lead. This
may cause electric shock or fire.
11.Make sure that you leave adequate ventilation space
around the refrigerator to prevent the compressor from
overheating and stopping. Please follow the
instructions given for installation.
12.Should the flexible supply cord be damaged, it must be
replaced by service agent approved by SHARP as a
special cord is required.
13.In case of gas leak, ventilate the area by opening a
window, etc. Do not touch the refrigerator or the power
outlet.
14.Do not place heavy or easily broken objects on top of
the refrigerator. Objects may fall when opening or
closing the refrigerator, causing injury.
15.Do not place objects containing liquid on top of the
refrigerator. Spillage may cause electric shock or fire.
16.Do not drop objects inside the refrigerator or strike the
inner wall. This may cause the inner surface to crack.
17.This refrigerator is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the refrigerator by a
person responsible for their safety. Young children
should be supervised to ensure that they do not play
with the refrigerator.
(A765)2-6_ENG 3.fm Page 2 Thursday, February 1, 2007 3:13 PM
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp sj 420 nsl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp sj 420 nsl in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 6,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info