19047
61
Zoom out
Zoom in
Previous page
1/64
Next page
61
SD-AS10
References
- Troubleshooting chart -
" Tuner
" Remote control
" Condensation
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (laser pickup, etc.) or on the trans-
mitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on
with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before operating the unit.
" If trouble occurs
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
Note:
If neither operation above restores the unit, clear all the memory by resetting it.
Clearing all the memory (reset)
Caution:
! When you reset, all data is deleted and the settings return to the default. (DVD ini-
tial settings are retained.)
! If problem occurred, the power turns off and the timer set indicator will blinking.
Symptom Possible cause Reference
page
The radio makes unusual
noises continuously.
! Is the unit placed near the TV or
computer?
! Is the FM antenna or AM loop anten-
na placed properly? Move the an-
tenna away from the AC power cord
or the unit if located near.
The preset channel cannot
be recalled.
! Did you remove the plug from the
AC outlet, or did a power failure oc-
cur?
P. 39
Preset the channel again.
Symptom Possible cause Reference
page
The remote control does not
operate properly.
! Is the battery polarity respected? P. 20
! Are the batteries dead?
! Is the distance or angle incorrect? P. 20
! Are there any obstructions in front of
the unit?
! Is the remote control sensor ex-
posed to strong light (inverter fluo-
rescent light, direct sunlight, etc.)?
P. 20
! Is the remote control for another
equipment used simultaneously?
The unit cannot be turned on
with the remote control.
! Is the AC power cord of the unit
plugged in?
P. 20
! Are the batteries inserted? P. 20
The unit performs unintend-
ed operations.
! Is the MODE 1/MODE 2 switch set
correctly?
P. 12, 13
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and plug in the unit, and
then turn the power on.
1 Press the POWER button to enter the power stand-by mode.
2 While holding down the DISC 5 button and the STOP button, press the POWER
button for 2 seconds or more.
3 When "ALL CLEAR" appears, press the POWER button to enter the stand-by
mode.
4 Press the POWER button again to turn on the unit.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SDAS10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SDAS10 in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info