19047
57
Zoom out
Zoom in
Previous page
1/64
Next page
57
SD-AS10
Advanced Features
- Connecting other equipment -
" Audio connection to digital tuner, etc.
You can listen to digital tuner sound from the speakers by connecting the amplifier
unit using an audio digital cable (not supplied).
To listen to digital tuner, etc. sound:
Turn the power on and press the FUNCTION button on the main unit.
Each press of this button changes the input in the order of "DIGITAL 1" "DIGITAL
2" "TV" "VCR".
You can also use the DIG FUNCTION (DIGITAL 1/DIGITAL 2) button on the remote
control.
" Digital connection to a digital audio
recorder, etc.
You can record sound on a digital audio recorder by connecting to the digital audio
output jack using an optical digital cable.
When connecting a digital audio recorder to the digital audio output jack, set
"Audio Out" to "PCM" (see page 47).
DIGITAL 1: The audio input is switched to "COAXIAL".
Digital tuner, etc.
Amplifier unit
DIGITAL OUT
To coaxial digital
audio output jack
Audio digital cable
(commercially available)
DIGITAL OUT
BITSTREAM For 5.1 channel Dolby Digital/DTS surround processors, etc.
PCM For 2 channel digital input amplifiers, etc.
Notes:
! Some discs are copy protected and digital recording is not possible (including DTS
signals).
! The digital audio output jack sends signals coming from a DVD/CD, the digital au-
dio input jack. Signals from the tuner, audio TV input jacks and audio VCR input
jacks are not sent.
! When you play DVD discs with Linear PCM sound recorded at a 96 kHz sampling
rate, sound may be sampled at 96 kHz (or 48 kHz depending on the disc).
! Plug in each cable fully to prevent noise interference.
! When using the optical digital jack, remove the cap first. After us-
ing the jack, replace the cap.
To optical digital
audio input jack
Optical digital cable
(commercially available)
Digital audio
recorder, etc.
Amplifier unit
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SDAS10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SDAS10 in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info