19047
42
Zoom out
Zoom in
Previous page
1/64
Next page
42
SD-AS10
Advanced Features
- Enjoying surround sound (sound mode) -
Enjoying surround sound (sound mode) (continued)
" Audio signal/Speaker indicators
Audio signal indicators light up for the corresponding audio source, and speaker indi-
cators are illuminated according to signals sent to the speakers.
Example:
Notes:
! You can switch the audio output when the disc contains sounds of multiple audio
formats (Dolby Digital, DTS, etc.). See page 28.
! Sound may not be produced from the subwoofer depending on the disc.
! You cannot change the multi channel mode or stereo mode while listening to the
radio.
Dolby Digital Unit display
Disc with this trademark
One of the digital audio systems for theatrical use. You can enjoy the stereophonic
effect in the home theater system.
When you set the audio output to Dolby Digital for a disc recorded in Dolby Digital,
the "DolbyD" indicator lights up (see page 28).
DTS (Digital Theater Systems) Unit display
Disc with this trademark
One of the digital audio systems for theatrical use. As the sound quality is empha-
sized, you can enjoy the realistic sound effect in the home theater system.
When you set the audio output to DTS for a disc recorded in DTS, the "DTS" indi-
cator lights up (see page 28).
Unit display
Linear PCM
A signal recording format without compression
Used in DVD and CD featuring a musical or concert.
Dolby Pro Logic
Stereo-recorded discs and video tapes
Dolby Pro Logic decodes 2 channel stereo sound from discs, videotapes, etc. to
reproduce 5.1 channel surround sound. You can enjoy a three-dimensional sound
field.
When Dolby Pro Logic is activated, the "Dolby PL " indicator lights up.
L R
SW
C
SRSL
L R
SW
SRSL
C
CD,VCR etc.
L R
SW
SRSL
C
(1) Left Front Speaker Indicator
(2) Left Indicator
(3) Center Indicator
(4) Center Speaker Indicator
(5) Right Indicator
(6) Right Front Speaker Indicator
(7) Low Frequency Effect Indicator
(8) Subwoofer Indicator
(9) Left Surround Speaker Indicator
(10) Left Surround Indicator
(11) Surround Monaural Signal Indica-
tor
(Lights up when the surround
speakers receive monaural sig-
nals.)
(12) Right Surround Indicator
(13) Right Surround Speaker Indicator
When 2.1 channel audio signals (L, R, LFE) are
received, the audio signal indicators "L", "R" and
"LFE" light up.
The illustration on the right indicates that 2 chan-
nel stereo sound (L and R) is reproduced.
When Dolby Pro Logic is activated
2 channel stereo sound is converted to 5.1 chan-
nel surround sound, and all the speaker indica-
tors " " light up.
L R
SWLFE
SRSSL
C
Audio signal
indicator
Speaker
indicator
(2)(1)
(3) (4) (6)(5)
(8)
(10) (11)(9)
(7)
(12) (13)
L
SRSSL
C
L R
SWLFE
L, R, LFE:
Incoming audio
signals
SRSSL
C
L R
SWLFE
" " appears when the
speakers are receiving
audio signals.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SDAS10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SDAS10 in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info