19047
7
Zoom out
Zoom in
Previous page
1/64
Next page
7
SD-AS10
General Information
- Precautions -
Precautions
" General
Warning:
The voltage used must be the same as that specified by this unit. Using this product
with a higher voltage other than that specified is dangerous and may result in a fire or
other types of accident, causing damage. SHARP will not be held responsible for any
damage resulting from the use of this unit with a voltage other than that specified.
" Volume control
The sound level at a given volume setting depends on speaker efficiency, location
and various other factors. It is advisable to avoid exposure to high volume levels,
which occurs while turning the unit on with the volume control setting up high, or
while continually listening at high volumes.
! Please ensure that the equipment is positioned in a well-ventilated area and that
there is at least 4" (10 cm) of free space along the sides and back. There must also
be a minimum of 6" (15 cm) of free space on the top of the unit.
! Use the unit on a firm, level surface free from vibra-
tion.
! Keep the unit away from direct sunlight, strong mag-
netic fields, excessive dust, humidity and electronic/
electrical equipment (home computers, facsimiles,
etc.) which generate electrical noise.
Amplifier unit
4" (10 cm)
Main unit
Position A
Position B
Position C
6" (15 cm)
6" (15 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm)
4" (10 cm) 4" (10 cm)
4" (10 cm) 4" (10 cm)
4" (10 cm) 4" (10 cm)
6" (15 cm)
6" (15 cm)
! Do not place anything on top of the unit.
! Do not expose the unit to moisture, to temperatures
higher than 140°F (60°C) or to extremely low temper-
atures.
! If the unit does not work properly, unplug and plug it
in again. Then turn on the unit.
! In case of an electrical storm, unplug the unit for safe-
ty.
! Hold the AC power plug by the head when removing
it from the AC outlet, as pulling the cord can damage
internal wires.
! Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your lo-
cal SHARP service facility.
! This unit should only be used within the range of 41°F
- 95°F (5°C - 35°C).
Cooling fan
This amplifier unit is fitted with a cooling
fan at the rear for improved cooling. Do not
cover the opening in this section with any
obstacles.
Caution:
! The amplifier unit will get warm while being used. Do not touch the warm areas of
the amplifier unit for prolonged periods to avoid damage to you.
! This amplifier unit contains an automatic protection circuit, which protects the am-
plifier unit from being damaged. All speaker outputs are muted when this circuit is
activated. Should the unit stop operating, first check the speaker terminals for
shorted wires, then press the POWER button to turn on the main unit.
Cooling fan
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SDAS10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SDAS10 in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info