713034
5
Zoom out
Zoom in
Previous page
1/52
Next page
EN-4
Built-in Toast Control Lever Rise
This toaster has a built-in toast control lever rise. If toasted food does not clear the top of
the toaster use the toast control lever to raise the food for easy removal.
Using your Toaster
Be sure to make defrost or reheat selections immediately after pressing the toast control
lever.
1. Adjust the toast shade selector knob to the desired setting (1-7).
Note: When using for the first time, select setting 4. Re-adjust the setting to suit your
personal preference on successive toasting operations.
Hint: When toasting thin sliced breads, use a lighter setting than you would normally
select.
2. Place sliced bread or other foods into the slots and press the toast control lever down
until it locks into place. The bread guides will automatically adjust to hold the food in
place.
3. When selecting DEFROST or REHEAT function, you must press the toast control lever
before selecting one of these settings. (Please see the next page for details.)
Important: If the wrong button is selected, press the CANCEL button and re-select
the desired cycle.
4. When toasting is complete, the toast control lever goes up and the unit shuts off.
Cancel Function
The CANCEL button illuminates automatically whenever the control lever is pressed and
remains lit until the toasting cycle is finished or the CANCEL button is pressed.
Defrost Function
Use to thaw and toast frozen bread, waffles and pastries.
1. Adjust the toast shade selector knob to the desired setting (1-7).
2. Insert the food to be toasted into the slot or slots.
3. Press the toast control lever down until it locks into place.
4. Press the DEFROST (for bread and waffles) button.
The buttons illuminate until the defrosting and toasting are complete or until the
CANCEL button is pressed.
Important: If the wrong button is selected, press the CANCEL button and re-select
the desired cycle.
5. When toasting is complete, the toast control lever goes up and the unit shuts off.
Toaster_v3.1_6_lang.indb 4 2018-02-27 08:39:37
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SACT2002I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SACT2002I in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info