719260

Sharp SA-FJ3001 Manual

9
Zoom out
Zoom in
Previous page
1/124
Next page
EN-8
EN
for a few seconds. Switch off “O” and tun on (I) again.
- If reverse “R” don’t work, turn off juicer “O”, unplug and reassemble the juicier by
following “product assembly” instructions, plug in and turn on “I” the juicer.
7. Once juice container is full (the maximum capacity is 400ml) or work done, please
switch off the juicer “0” and empty both containers before continuing to use.
Note: The maximum time of operation should not exceed 15 minutes and it is
recommended to maintain minimum 30 minutes of rest time between continuous
two cycles.
Note: Do not insert too much food to extract per time. During operation, once the juice
container is full, you must stop the appliance and empty the residue container before
next cycle.
Note: During operation, if the interlock switch between the jar lid and the motor unit is
disconnected, the motor will stop to prevent from danger.
Cleaning and Maintance
1. In order to make easy the disassembly and cleaning of the appliance, run the juicer
without any load for around 30 seconds. If the jar lid is hard to detach, try to turn
on reverse “R” or pout some water into feeding tube to clean it.
2. Before cleaning, unplug the appliance and wait until it is cool down.
3. Reverse the assembly procedure to take the juicer apart.
Caution: DO NOT switch directly from “I” to “R” nor “R” to “I” at any time during
operation. If required, always switch off the juicer by switching to “O” position.
Once juicer stop working, select “I” or “R”.
Note: The grinding head can be easily detached from juicing jar, if pushed the axis at the
bottom of the juicing jar (see Fig. 7)
4. Empty the residue container, and then clean the jar lid, grinding head, strainer, jar
and residue container under running water. When cleaning the strainer, only need
to brush the concave surface of the strainer under running water with the small
cleaning brush for several times, and then the whole strainer can be cleaned well.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp SA-FJ3001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp SA-FJ3001 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info