22538
10
Zoom out
Zoom in
Previous page
1/24
Next page
9
NO.
X2
NO.
NO.
Memory program entry
You can change memory programs for memory
banks. See time cooking on page 11.
R-21HT
Memory banks 20
Cooking stage
Memory NO.1 -10 max. 3 stages
Memory NO. 11-20 max. 2 stages
R-21HV/JV
Memory banks 10
Cooking stage 1 stage
The R-21HV or R-21JV ovens can be programmed
only using 100% power. Follow steps 1,2,3 and 7
below.
Setting time and power level
* Suppose you want to set 4 minutes at 60% for the
1st stage and 2 minutes at 30% for the 2nd stage
for 1 serving in memory 1.(R-21HT)
Note: 1. (For R-21HT)
If you want to set memory 11-20, press
the desired number pad twice.
2. If the cooking time is over the maximum
time, the display will show EE 9. See
page 11.
3. At step 1, no audible signal will be heard
when the SET pad is touched the first
time. An audible signal will sound when
the SET pad is touched the second time.
Setting magnification factor
Ovens are shipped with a magnification factor of 1.7
for DOUBLE QUANTITY.
You can change the magnification factor for double
quantity and have it stored in the memory.
* Suppose you want to set the magnification factor to
1.67 for double quantity in memory 1.
1 Touch SET pad twice
within 2 sec.
2 Touch DOUBLE
QUANTITY pad.
3 Touch number pad 1.
4 Touch SELECTATIME
pad.
5 Touch NUMBER pads
1,6 and 7.
6 Touch SET pad twice.
Procedure Display
SET
x 2
1
NO.
X2
SELECTATIME
Note: 1. In case you want to change the magnifica-
tion factor it must be set for each
pad
separately.
2. The magnification factor can be set from
0.00 to 9.99.
3. At step 1, no audible signal will be heard
when the SET pad is touched the first time.
An audible signal will sound when the SET
pad is touched the second time.
SET
x 2
X2
X2
DOUBLE
QUANTITY
1
67
1 Touch SET pad twice
within 2 sec.
2 Touch number pad.
3 Enter cooking time for
1st stage.
4 Enter power level in
1st stage.
5 Enter cooking time for
2nd stage.
6 Enter power level for
2nd stage.
7 Touch SET pad twice.
Procedure Display
6
1
x 2
SET
SELECTAPOWER
NO.
2
00
SELECTATIME
3
SELECTAPOWER
SET
x 2
SELECTATIME
4
00
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp R21JC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp R21JC in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info