609477
28
Zoom out
Zoom in
Previous page
1/49
Next page
26
SENSNCOOK (R-967M / R-96STM)
IMPORTANT NOTES FOR SENSNCOOK:
•After the oven is plugged in, wait 2 minutes before using SENSNCOOK.
Once a SENSNCOOK programme has started, do not open the door or press the STOP/
CLEAR key until the menu has stopped flashing on the display. During this time, Sensor
technology detects the humidity emitted from the food, as it heats, to determine the cooking
time. Opening the door or stopping the oven disturbs the humidity and affects the cooking result.
•For best results when using SENSNCOOK, ensure both the oven and cookware are dry and
cool. Wipe off any moisture from the outside of the cooking containers and the interior of the
oven with a dry cloth or paper towel prior to cooking.
If the food container is made of aluminium foil, remove the food and place in a suitable
container, cover with cling film and pierce in 5 places before heating. (See ‘Suitable Cookware’
on page 37).
If the food container is not covered, or is not sealed correctly, cover with microwave cling film
and pierce in 5 places.
If the food container is damaged, cracked or split, follow food manufacturers’ cooking
instructions - Do not use SENSNCOOK.
•Press the MORE or LESS keys once within 2 seconds after pressing the SensNcook key as
instructed in the chart on pages 27 - 28.
When action is required (example, to turn food over), the oven stops, the audible signal sounds
and instructions will appear on the display. To continue cooking, press the START/AUTO
MINUTE key.
The SENSNCOOK food programme is only suitable for the food types and weights given in the
chart on pages 27 - 28. To cook weights or foods not included in the chart, please refer to the
charts in the Cookery Book.
The final food temperature will vary according to the initial food temperature. Check food is
thoroughly heated after cooking. If necessary, you can extend the cooking time manually.
The SENSNCOOK function can only be input within 3 minutes after cooking completion,
closing the door or pressing the STOP/CLEAR key.
SENSNCOOK enables you to cook a range of
foods using Sensor technology.
For cooking instructions please refer to the chart
on pages 27 - 28.
Press the selected key once and the oven will
automatically start to cook after 2 seconds.
Follow the example opposite for more details on
how to operate this function.
Example:
To cook 0.1kg Rice.
1. Press the RICE/PASTA key once.
After 2 seconds the
oven will start cooking
automatically.
x1
VJCM Modular Op Man 23/01/2003 14:45 Page 26
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp R-967M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp R-967M in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info