69303
12
Zoom out
Zoom in
Previous page
1/40
Next page
GB-6
SETTING THE CLOCK
MICROWAVE POWER LEVELS
270 WATT = 30 % output
90 WATT = 10 % output
Your oven has 5 power levels. To choose the power level, follow the advice given in the recipe section.
900 WATT = 100 % output
630 WATT = 70 % output
450 WATT = 50 % output
To set the microwave power level:
1. Input the time by pressing the TIME keys.
2. Select the desired microwave power setting by pressing the MICROWAVE POWER LEVEL key.
If the MICROWAVE POWER LEVEL key is pressed once, “900W” (100 %) will be displayed.
If you miss your desired level, continue pressing the MICROWAVE POWER LEVEL key until you reach the
level again.
NOTE: If the power level is not selected, the level 900 W (100 %) is automatically set.
If this occurs during cooking, the programme will
be erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
5. If you do not set the clock, press the STOP key
once. “.0” will appear on the display. When the
operation of the oven is finished, “.0” will
reappear on the display instead of the time of day.
6. If you set the clock, energy save mode does not
work.
There are two setting modes: 12 hour clock and 24 hour clock.
x2
x3
1. Choose the 24 hour clock by
pressing the INFO/CLOCK
key 3 times.
2. Set the hours. Press the TIME keys
until the correct hour is displayed.
3. Change from hours to
minutes by pressing the
INFO/CLOCK key once.
Check the display.
4. Set the minutes. Press the TIME
keys until the correct minutes are
displayed.
5. Press the INFO/CLOCK
key once to start the clock.
NOTES:
1. Press the STOP key if you make a mistake during
programming.
2. If the oven is in cooking mode and you wish to
know the time of day, touch the INFO/CLOCK
key. As long as your finger is touching the key, the
time of day will be displayed.
3. If the electrical power supply to your microwave
oven is interrupted, plug in the oven again, then
open and close the door. The display will show:
"ENERGY SAVE MODE TO GO OUT OF
ENERGY SAVE MODE SET CLOCK".
x3
x1
x1
1. To set the 12 hour clock, press
the INFO/CLOCK key twice,
as shown:
Example:
To set the 24 hour clock to 23:35:
2. To set the 24 hour clock, press
the INFO/CLOCK key 3 times,
as shown:
x2 x3
x3 x5
R-879_[EN].qxd 6/4/07 3:58 PM Page 6
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp R 879 IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp R 879 IN in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp R 879 IN

Sharp R 879 IN User Manual - German - 382 pages

Sharp R 879 IN User Manual - Dutch - 78 pages

Sharp R 879 IN User Manual - Dutch, French, Italian, Portuguese, Spanish - 382 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info