7
BEFORE OPERATION
ENGLISH
USING THE STOP KEY
Use the STOP key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press
the STOP key twice.
Your oven has an energy save mode.
Plug in the oven. Nothing will appear on the display at this time.
1. Open the door.
The oven display will show “ENERGY SAVE MODE”.
2. Close the door.
The display will show “.0”.
If you set the clock, “energy save mode” does not work.
If you keep “energy save mode” go to step 4.
3. Set the clock (See page 8).
4. Heat the oven without food (See page 9).
ENERGY SAVE MODE
Your oven comes set for the energy save mode. If you do nothing for 2 minutes after a preceding
operation, i.e. plugging in or at the end of cooking, the power will go off automatically. To restore power
on, open and then close the door. If you set the clock, energy save mode does not work.
To start energy save mode, follow the instructions below.
Example:
To start the energy save mode, (the current time is 23:35):
1. Make sure the
correct time
appears on the
display.
3. Press the 1 MIN
key once.
2. Press the
CLOCK
SETTING key.
4. Press +1 min key. The
power will be off and the
display will show nothing.
x1
x1
x1
Display:
R-852 ENGLISH 5/5/99 2:05 pm Page 7
