Manual Sharp R-28ST (page 172 of 180) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

526711

172

Zoom out

Zoom in

1/180

GB-10

OTHER CONVENIENT FUNCTIONS

1. SEQUENCE COOKING

This function allows you to cook using up to 3 di erent stages which can include manual cooking time and

mode and/ or time defrost as well as weight defrost function. Once programmed there is no need to interfere

with the cooking operation as the oven will automatically move onto the next stage. An audible signal will

sound once after the  rst stage. If one stage is defrosting, it should be in the  rst stage of sequence cooking.

NOTE: Auto menu cannot be set as one of the multiple sequences.

Example: If you want to cook food for 20 minutes on P100 microwave power and then for 5 minutes with

P80 microwave power. The steps are as follows:

- 1. Press the MICROWAVE button, P100 will appear in the LED display.

- 2. Press the MICROWAVE button once more to con rm the setting.

- 3. Enter the cooking time by rotating the ENTRY dial until the display show “20:00” minutes.

- 4. Press the MICROWAVE button, P100 will appear in the LED display.

- 5. Rotate the ENTRY dial to select the microwave power to P80.

- 6. Press the MICROWAVE button once more to con rm the setting.

- 7. Enter the cooking time by rotating the ENTRY dial until the display show “5:00” minutes.

- 8. Press the START/+1min button to start cooking.

2. +1min FUNCTION (Auto minute)

Direct start

You can directly start cooking on P100 microwave power level for 1 minute by pressing the START/ +1min

button. The cooking process will start immediately and each time the button is pressed this will increase the

cooking time by 1 minute.

NOTE: The cooking time may be extended to a maximum of 95 minutes.

3. DELAY START

DELAY START cooking allows you to program the oven to start cooking at a point later in the day.

Before setting, make sure the clock is set to the correct time of day.

Example:

Follow the example below for starting the microwave automatically at a later point of time for 7 minutes on

P80. The maximum time-delay is 23 hours and 59 minutes.

- 1) Press the MICROWAVE button. P100 will be displayed.

- 2) Rotate the ENTRY dial to select the microwave power level to P80.

- 3) Press the MICROWAVE button once more to con rm the setting.

- 4) Enter the cooking time by rotating the ENTRY dial until the display show “7:00” minutes.

After the above steps, please do not press START/+1min button.

- 5) Press the CLOCK SET/ DELAY START button. The display will show the current time and the hours  gure

will  ash. Moreover the clock indicator will light up.

- 6) Rotate the ENTRY dial to set the hour of the desired start time for cooking.

The input time should be within 0-23.

- 7) Press CLOCK SET/ DELAY START button and the minutes  gure will  ash.

- 8) Rotate the ENTRY dial to set the minutes of the desired start time for cooking.

The input time should be within 0-59 minutes.

- 9) Press the START/+1min button to confirm the setting for the delay start. The clock indicator will

flash. When the pre-programmed time arrives, an audible signal will sound twice and the oven starts

automatically for 7 minutes on P80. At the same time the clock indicator will disappear and the microwave

indicator and high heat indicator will appear on the display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp R-28ST in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 38,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp R-28ST Manual

Product: