722919
237
Zoom out
Zoom in
Previous page
1/246
Next page
GB-18
ENGLISH
MICROWAVE COOKING
NOTE:
When the oven starts, the oven lamp will illuminate and the turntable will rotate
clockwise or anticlockwise.
If the door is opened during cooking/defrosting to stir or turn over food, the cooking
time on the display will stop automatically. The cooking/defrosting time starts to count
down again when the door is closed and the START/+30sec./ENTER button is pressed.
When cooking/defrosting is complete, the time of day will reappear on the display, if the
clock has been set.
If you wish to know the power level during cooking, press the MICRO. POWER button. The
current power level will displayed for 3 seconds.
OTHER CONVENIENT FUNCTIONS
1. SEQUENCE COOKING
This function allows you to cook using up to 2 different stages which can include manual
cooking times, time defrost as well as a weight defrost function. Once programmed there is no
need to interfere with the cooking operation as the oven will automatically move onto the next
stage. An audible signal will sound once after the  rst stage. If the defrost function is needed
within sequence cooking - please note that this should always be the  rst stage of sequence
cooking.
NOTE:
AUTO MENU cannot be set as one of the multiple sequences.
Example: If you want to cook food for 20 minutes on P100 microwave power and then for
5 minutes with P80 microwave power. The steps are as follows:
- 1. Press the MICRO. POWER button, P100 will appear in the LED display.
- 2. Press the START/+30sec./ENTER button once to con rm the setting.
- 3. Enter the cooking time by rotating the ENTRY dial until the display shows “20:00” minutes.
- 4. Press the MICRO. POWER button, P100 will appear in the LED display.
- 5. Press the MICRO. POWER button twice or rotate the ENTRY dial to select the microwave
power to P80.
- 6. Press the START/+30sec./ENTER button once more to con rm the setting.
- 7. Enter the cooking time by rotating the ENTRY dial until the display shows “5:00” minutes.
- 8. Press the START/+30sec./ENTER button to start cooking.
2. +30sec FUNCTION (Auto minute)
Direct start
You can directly start cooking on P100 microwave power level for 30 seconds by pressing
the START/+30sec./ENTER button. The cooking process will start immediately and each
time the button is pressed this will increase the cooking time by 30 sec.
NOTE: The cooking time may be extended to a maximum of 95 minutes.
3. CHILD LOCK:
Use to prevent unsupervised operation of the oven by children.
a. To set the CHILD LOCK:
Press and hold the STOP/CLEAR button for 3 seconds until the display shows:
b. To cancel the CHILD LOCK:
Press and hold the STOP/CLEAR button for 3 seconds until a long beep sounds.
4. ECO Mode:
In standby mode, press the "STOP" button once, the LED display will be off and microwave
oven enter to ECO mode. Any operation can light the LED display again, and the microwave
oven will return to standby mode.
237


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp R-243 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp R-243 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info