654996
22
Zoom out
Zoom in
Previous page
1/29
Next page
EN-22
Thus, washing up will be done only on the lower basket of your machine. In using this feature,make sure that there
are no dishes in the upper basket.
Note : If you have used an extra feature on the latest washing program, this feature will remain active also on the
next washing program. If you do not want to use this feature on the newly selected washing program, press the
selected feature button again, and check that the lamp on the button goes off.
6.) Door Handle
The door handle is used to open/close the door of your machine.
7.) Programme selector Button
With the program selector button, you can select a suitable program for your dishes.
8.) Start/Pause Button
Once you press the Start/Pause button, the programme you selected with the programme selector button will
start running and the status indicator lamp “wash” will light up. In the stop condition while wash led is On, the
Start/Pause led will blink.
9.) Low Salt Warning indicator
In order to see whether the softening salt in your machine is sufcient or not, check the salt warning light on the
display. When the salt light warning light starts coming on, you need to ll in the salt chamber.
Low Rinse Aid Warning indicator
In order to check that there is sufcient rinse aid in your machine check the rinse aid warning light on the display.
When the rinse aid warning light starts coming on , ll in the rinse aid chamber.
10. ) Program Monitor Lights
The program ow can be monitored via program monitor lights on control panel.
• Wash
• Rinse
• End
11.) Remaining Time Indicator
The Remaining Time Indicator displays the program times and remaining time during the program that is in
operation. In addition, you can adjust the program delay time by pressing the buttons on the indicator before the
program starts. If you want to change the delay time, you can set the time by pressing the Start/Pause button and
using buttons on the indicator. Press the Start/Pause button again in order to activate.
Child Lock Operation
In order to activate the child lock, press “+” and “–” buttons on the Remaining time indicator simultaneously 3 for
seconds. At this time, “CL” appears for 2 seconds on remaining time indicator. To deactivate child lock, press “+”
and “–” buttons again simultaneously for 3 seconds. “CL” will blink for 1 times.
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp QW-T24F443I-EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp QW-T24F443I-EU in the language / languages: English as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info