745404
6
Zoom out
Zoom in
Previous page
1/28
Next page
6
FLASHING LIGHT
To activate the light functions, you must switch AUDIO-2 to AUX mode.
1. Long press the LIGHT button to turn on/o the decoration LED
lighting around the speakers.
2. Press the LIGHT button repeatedly to choose the lighting mode for
the inner lights:
L-1: Blue LED will be on constantly.
L-2: Red LED will be on constantly.
L-3: Green LED will be on constantly.
L-4: Three-colors  ash in gradual mode.
L-5: Seven-colors  ash in gradual mode.
L-6: Three-colors dance with the music.
Press one more time to turn o .
BLUETOOTH OPERATION
1. Rotate the AUDIO-1 knob to BT mode to enter Bluetooth mode, “ - bt -
will be lit up and  ash on the display screen.
2. Turn on the Bluetooth function on your device, scan “SHARP PS-940”
and connect. Input the password 0000 if required.
3. Once successfully connected, there will be a prompt sound and “ - bt - ”
will stop  ashing.
4. Adjust the EQ e ect by sliding the EQ SLIDER-A.
5. Rotate the A-VOLUME knob or adjust the volume on the external
device to increase or decrease the music volume to your desired level.
6. Control the playback with your audio device.
7. Press the BLUETOOTH CONNECTION button to disconnect the
bluetooth connection.
Wireless connection with multiple PS-940 (connect to the compatible
speakers).
1. Select a PS-940 as the host speaker. Long press the BLUETOOTH
CONNECTION button,
bt - “ will be shown on the display screen.
2. Continuously press the BLUETOOTH CONNECTION button twice on
another one or more PS-940. When “ - bt
shown on the display,
it means the speakers have been connected to the host speaker
successfully.
3. Make your device connect to the host speaker. Then you can enjoy the
music via your the speakers.
NOTES: The product supports 3 phones (except for Iphone) to establish
bluetooth connection at the same time.
USB OPERATION
This unit provides two USB ports, one for playback, and another for
charging.
1. Set AUDIO-1 to USB mode. “ - USb -” will be shown on the display.
2. Plug the USB memory stick to the USB PLAYBACK PORT on the unit.
Playback will start automatically from track 01.
3. To pause the playback, press the PLAY/PAUSE button on the top panel
of the unit. Press this button again to resume the playback.
4. To select a desired track, press the PREVIOUS or NEXT button
respectively during playing until the desired track appears on the
display. The unit will start to play automatically.
AUX-IN OPERATION
1. Set the AUDIO-1 to AUX mode, AUX” will be shown on the display.
2. Connect your audio device to the AUX IN JACK on the top panel of the
unit with an AUX IN cable.
3. Rotate the A-VOLUME knob to adjust the music volume.
4. Use the EQ SLIDER-A to adjust your favor sound e ect.
5. Control the playback with your audio device.
MIC/GUITAR OPERATION
1. Set the AUDIO-2 to MIC/GUITAR mode.
2. Connect your microphone/guitar to the MIC or GUITAR JACK.
3. Rotate the B-VOLUME knob to adjust the microphone/guitar volume.
4. Use the EQ SLIDER-B to adjust your favor sound e ect.
NOTES: The EQ SLIDER-B cannot work if the AUDIO-2 is set to AUX mode.
Technical speci cation
Model PS-940
Power Supply AC ~ 100-240V, 50/60Hz
Rated Power Consumption 20W
Standby Power Consumption <0.5W
Output Power 2 x 25 W (RMS)
Total max power output 180 W
Frequency Response 40Hz-15KHz
Battery Built-in 37,44Wh Li-ion battery
Bluetooth
Version V 4.0
Maximum power transmitted <20 dbm
Frequency bands 2402 MHz ~ 2480 MHz
NOTE: Speci cations are subject to change for continuous improvement
without prior notice.
635mm
224mm 300mm
8,0 kg
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp PS-940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp PS-940 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp PS-940

Sharp PS-940 Quick start guide - All languages - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info