Manual Sharp PS-920 (page 7 of 40) (English, German, French, Italian, Polish, Spanish)

679560

Zoom out

Zoom in

1/40

NOTE: in order to get the best reception, extend the FM ANT.

on the rear of the unit before use to its full length.

TUNING TO A RADIO STATION

If you know the station frequency that you want to tune to directly:

• Tune to a station by press the

/ TUN.+ or / TUN.- button repeated-

ly. Hold them to search upward or downward. The station frequency is

shown on the display.

To tune to a preset station:

• To tune to the next preset station, press the 10/M./FOLD.+ button.

• To tune to the previous preset, press the 10/M./FOLD.- button.

AUTO PRESET MEMORY/SCAN

To scan for stations within reception range and save them to preset

memory automatically, press and hold the

/BT/SCAN button. After the

unit is  nished scanning, the unit will automatically tune to preset number

1 (P01).

MANUAL PRESET MEMORY OPERATION

Choose which stations to save in preset memory instead of scanning

automatically.

1. Use the

/ TUN.+ or / TUN.- button to tune to the station that you

want to save as a preset (e.g., 93.1).

2. Press the P-MODE/M. button. “P01” will  ash on the display to indicate

that you are saving the station as Preset Memory 01. (To change the

preset memory number, press the 10/M./FOLD.+ or 10/M./FOLD.-

buttons.)

3. Press the P-MODE/M. button to  nish saving the station (e.g., P01 is

now set to 93.1).

4. To save another station, repeat steps 1 to 3. You may save up to 30 FM

stations.

USB OPERATION

This unit provides two USB ports for music playback.

1. Press the FUNCTION button on unit to select “USB1” or “USB2” mode.

2. Plug the USB memory stick to the USB port on top of the unit. Playback

will start automatically from Track 1.

3. To pause playback, press the

/BT/SCAN button on unit. The playing

time will  ash on the display.

4. To resume playback, press the

/BT/SCAN button again.

5. To select a desired track, press the

/TUN.+ or /TUN.- button

respectively during playing until the desired track appears on the

display. The unit will start play automatically.

6. To search for a particular passage during playback, press and hold the

/TUN.+ or /TUN.- button to scan the current playing track at high

speed until desired point (passage) appears, then release the button for

normal playback mode.

7. To select a song which track number exceeds 10, press the 10/M./

FOLD.+ or 10/M./FOLD.- button each time to skip forward/backward

10 tracks, then press the

/TUN.+ or /TUN.- button to select

desired track.

8. To select a desired folder (if the USB contains more than one folder),

press and hold the 10/M./FOLD.+ or 10/M./FOLD.- button each time to

skip forward/backward a folder, then press the

/TUN.+ or /TUN.-

button to select desired track.

IMPORTANT: The USB port is intended for data transfer only,

other devices cannot be used with this USB connection. The use

of USB extension cords is not recommended. Don’t unplug the

USB from the unit when playing or reading the USB device.

REPEAT PLAY

You can play one track or all tracks on the USB repeatedly.

To Repeat a Single Track

1. Press P-MODE/M. button on unit during play, the display will show “

” and the current track will be played over an over again.

2. To cancel repeat play, press P-MODE/M. button on unit until “

”

disappears from the display.

To repeat all the Tracks

1. Press P-MODE/M. button on unit until the “

” shows steadily on the

display, all tracks on the USB will be played over and over again.

2. To cancel repeat play, press the P-MODE/M. button on unit until “

”

disappears from the display.

To repeat the folder (only for USB which contains more than one

folder)

1. Press the P-MODE/M. button on unit until “

FOLDER” shows steadily

on the display, the current folder will be repeated over and over again.

2. To cancel repeat play, press the P-MODE/M. button on unit until “

FOLDER” disappears from the display.

RANDOM PLAY

Press the P-MODE/M. button on unit in play mode till the “RAND”

shows steadily on the display, the random play will start from next track

automatically. Press the P-MODE/M. button on unit again until the

“RAND” disappears from the display to cancel.

BLUETOOTH OPERATION

1. Press the FUNCTION button on unit to switch to BLUETOOTH function,

the LCD will display “bt” and the pair indicator will  ash at high speed.

2. Turn on the Bluetooth function on the device, scan the unit “PS-920”

and connect, then input the password 0000 if required, the pair

indicator keep light up to indicate connection done, and the display

will show “bt”. Press Play to start playback.

3. Rotate the VOLUME knob on the unit or adjust the volume on the

external device to increase or decrease the music volume to your

desired level.

4. Press and hold the

/BT/SCAN button to disconnect Bluetooth.

NOTE: The Bluetooth works best within 10 meters in open air.

AUX-IN OPERATION

1. Press the FUNCTION button on unit to select the “AUX” mode.

2. Connect your audio device to the AUX IN jack on the top panel of the

unit with an AUX IN cable.(audio cable is not included)

3. Rotate the VOLUME knob on the unit or adjust the volume on the

external device to increase or decrease the music volume to your

desired level.

4. Control the playback with your audio device.

MIC JACK OPERATION

Microphone input is available in all modes.

1. Connect your microphone to the 6.3mm MIC JACK found on the top

panel of the unit.

2. Rotate the MIC VOL. knob on the unit to increase or decrease the

microphone volume.

3. Press the ECHO Button to turn on or o the echo e ect of the

microphone.

Buongiorno, nella mia ps 920 lampeggia il led rosso verde e non funziona,cosa può essere ? Submitted on 2-7-2022 at 13:30
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp PS-920 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp PS-920

Sharp PS-920 Quick start guide - All languages - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp PS-920 Manual

Product: