Manual Sharp PN-E421 (page 8 of 64) (English, German, French, Spanish)

526679

Zoom out

Zoom in

1/64

MOUNTING PRECAUTIONS

• Sincethemonitorisheavy,consultyourdealerbefore

installing, removing or moving the monitor.

• Wheninstalling,removingormovingthemonitor,ensure

that this is carried out by at least 2 people.

• AmountingbracketcompliantwithVESAspecications

is required. Do not use any screw holes other than VESA

holes for installation.

• Whenmovingthemonitor,besuretoholditwiththe

handles both on the rear and the unit bottom. Do not hold

the LCD panel. This may cause product damage, failure, or

injury.

• Installthemonitorwiththesurfaceperpendiculartoalevel

surface. If necessary, the monitor may be tilted up to 20

degrees upward or downward.

• Mountingthemonitoronthewallrequiresspecialexpertise

and the work must be performed by an authorized SHARP

dealer. You should never attempt to perform any of this

work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or

mishandling.

• Thismonitorshouldbeusedatanambienttemperature

between 32°F (0°C) and 104°F (40°C). Provide

enough space around the monitor to prevent heat from

accumulating inside.

For the monitor in horizontal orientation

7-7/8 [20]

Unit: inch [cm]

2 [5]

[5]

For the monitor in vertical orientation

Unit: inch [cm]

2 [5]

[5]

7-7/8 [20]

* This monitor can be installed close to a wall. However,

as the monitor emits heat during operation, please be

aware that this heat may discolor or alter the wall.

• Ifitisdifficulttoprovidesufficientspaceforanyreason

such as the installation of the monitor inside a housing, or

if the ambient temperature may be outside of the range

of 32°F (0°C) to 104°F (40°C), install a fan or take other

measures to keep the ambient temperature within the

required range.

• Temperatureconditionmaychangewhenusingthedisplay

together with the optional equipments recommended by

SHARP. In such cases, please check the temperature

condition specified by the optional equipments.

• Adheretothefollowingwheninstallingthemonitorinits

vertical orientation. Failing to adhere to the following may

cause malfunctions.

- Install the monitor such that the power LED is located on

the bottom side.

- Set the MONITOR on the SETUP menu to PORTRAIT.

(See Operation guide.)

• Donotblockanyventilationopenings.Ifthetemperature

inside the monitor rises, this could lead to a malfunction.

• Aftermounting,pleasecarefullyensurethemonitoris

secure, and not able to come loose from the wall or mount.

• Donotplacethemonitoronadevicewhichgeneratesheat.

• Usethesuppliedverticalstickerwhenyouinstallthe

monitor in vertical orientation.

Operation panel

Logo

 Donotremovethefactory-afxedstickerbutafxthelogo

stickeroverit.Becarefulnottocovertheremotecontrol

sensor or buttons.

• Besuretouseawall-mountbracketdesignedor

designated for mounting the monitor.

• Thismonitorisdesignedtobeinstalledonaconcretewall

or pillar. Reinforced work might be necessary for some

materials such as plaster / thin plastic board / wood before

starting installation.

This monitor and bracket must be installed on a wall which

can endure at least 4 times or more the weight of the

monitor. Install by the most suitable method for the material

and the structure.

• Whenattachinganoptionalpart,followthestepsdescribed

in the manual for the optional part.

• ForuseonlywithULListedWallMountBracketswith

minimum weight/load: PN-E471R: 102 kg. (224.9 lbs.),

PN-E421: 88 kg. (194.0 lbs.).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp PN-E421 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 5,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp PN-E421 Manual

Product: