526686
70
Zoom out
Zoom in
Previous page
1/77
Next page
68
Troubleshooting
Problem Check Page
No picture and no sound
or projector does not
start.
• Projector power cord is not plugged into the wall outlet. 22
• Power to the external connected devices is off.
• The selected Input mode is wrong. 29
• The AV Mute function is working. 29
• Cables are incorrectly connected to the projector. 2024
• Remote control battery has run out. 13
External output has not been set when connecting a notebook computer.
20
• The lamp unit cover is not installed correctly. 64, 65
Sound is heard but no
picture appears
(or picture is dark).
• Cables are incorrectly connected to the projector. 2024
• “Bright” is set to minimum position. 43
• Depending on the computer you are using, an image may not be
projected unless the signal output setting of the computer is switched
to the external output. Refer to the computer's operation manual for
how to switch its signal output settings.
• Is “On” selected in “DLP
®
Link
TM
”?
59
Dark or bluish image
• Check that “Wall Color” is configured correctly.
49
Color is faded or poor.
• Image adjustments are incorrectly set.
• Make adjustments of “Color” and “Tint” in “Picture Mode” and lower the
“BrilliantColor
TM
” value.
43
(Video Input only)
• Video input system is incorrectly set.
(COMPUTER/COMPONENT Input only)
• Input signal type (RGB/Component) is incorrectly set.
46
45
Picture is blurred;
noise appears.
• Adjust the focus. 26
• The projection distance exceeds the focus range. 17
There is fog on the lens. If the projector is carried from a cold room into a
warm room, or if it is suddenly heated, condensation may form on the surface
of the lens and the image will become blurred. Set up the projector at least
one hour before it is to be used. If condensation should form, remove the
power cord from the wall outlet and wait for it to clear.
(Computer Input only)
• Perform “SIG-ADJ” Adjustments (“Clock” and “Phase” Adjustment)
• Noise may appear depending on the computer.
45
Picture appears but no
sound is heard.
• Cables are incorrectly connected to the projector. 2024
• Volume is set to minimum.
• When the projector is connected to an external device and the volume
is set to minimum, the sound is not output even if you turn up the
volume of the external device.
29
• “Speaker” is set to “Off.
• The Audio Mute function is working.
50
53
Data image is not
centered.
• Make the necessary adjustments of each item in the “SIG-ADJ” menu. 45
• Depending on the computer you are using, the output resolution signal
may be different from the one you have set. For details, refer to the
operation manual of the computer.
An unusual sound is
occasionally heard from
the cabinet.
• If the picture is normal, the sound is due to cabinet shrinkage caused
by room temperature changes. This will not affect operation or
performance.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp PG-LW3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp PG-LW3000 in the language / languages: English as an attachment in your email.

The manual is 8,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp PG-LW3000

Sharp PG-LW3000 User Manual - German - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info