526683
61
Zoom out
Zoom in
Previous page
1/75
Next page
59
Appendice
Specifi che RS-232C e impostazioni dei comandi
Controllo del computer
È possibile usare un computer per controllare il proiettore, collegando un cavo di
controllo seriale RS-232C (di tipo incrociato, disponibile in commercio) al proiettore.
(Vedere pagina
22.)
Condizioni per la comunicazione
Confi gurare le impostazioni della porta seriale del computer in modo da abbinarle a
quelle della tabella.
Formato segnale: Conforme allo standard RS-232C. Bit di parità: Nessuno
Velocità di trasmissione: 9.600 bps Stop bit: 1 bit
Lunghezza dati: 8 bits Controllo fl usso: Nessuno
Formato base
I comandi del computer vengono inviati nel seguente modo: comando, parametro e
codice di ritorno. Dopo che il proiettore elabora il comando dal computer, invia un
codice di risposta al computer.
Formato comando
C1 C2 C3 C4 P1 P2 P3 P4
Codice ritorno (0DH)
Comando a 4 cifre Parametro a 4 cifre
Formato codice risposta
Risposta normale
Risposta problema (errore di comunicazione o comando sbagliato)
OK
Codice ritorno (0DH)
ERR
Codice ritorno (0DH)
Informazioni
Quando si controlla il proiettore utilizzando i comandi RS-232C da un computer, prima di inviare i
comandi
attendere almeno 30 secondi dopo l'accensione.
Dopo aver inviato una selezione ingresso oppure un comando di regolazione immagine ed aver
quindi ricevuto una risposta positiva “OK, il proiettore può impiegare qualche istante ad elaborare il
comando. Se il secondo comando viene inviato mentre il proiettore sta ancora elaborando il primo, è
possibile ricevere un messaggio “ERR. In tal caso, provare a inviare di nuovo il secondo comando.
Quando viene inviato più di un codice, inviare ciascun comando solo dopo che è stato verifi cato il
codice di risposta del proiettore per il comando precedente.
“POWR????”, “TABN _ _ _ 1, “TLPS _ _ _ 1, “TPOW _ _ _ 1, “TLPN _ _ _ 1, “TLTT _ _ _ 1,
“TLTM _ _ _ 1, “TLTL _ _ _ 1”, “TNAM _ _ _ 1”, “MNRD _ _ _ 1, “PJN0 _ _ _ 1”
Quando il proiettore riceve i comandi speciali sopra illustrati:
* La schermata non scomparirà dalla vista.
* Il timer “Spegn. Automatico” non verrà azzerato.
I comandi speciali sono disponibili per le applicazioni che richiedono interrogazione ciclica continua.
Se nella colonna dei parametri viene visualizzato un carattere di sottolineatura (_), inserire uno
spazio.
Se nella colonna dei parametri viene visualizzato un asterisco (*), inserire un valore compreso
nell'intervallo indicato tra parentesi sotto il contenuto del controllo.
Nota
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp PG-LW2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp PG-LW2000 in the language / languages: Italian as an attachment in your email.

The manual is 8,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp PG-LW2000

Sharp PG-LW2000 User Manual - English - 75 pages

Sharp PG-LW2000 User Manual - German - 75 pages

Sharp PG-LW2000 User Manual - Dutch - 75 pages

Sharp PG-LW2000 User Manual - Swedish - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info