526683
61
Zoom out
Zoom in
Previous page
1/75
Next page
59
Aanhangsel
RS-232C technische gegevens en commando-instellingen
Computer-gestuurde bediening
Een computer kan worden gebruikt voor het bedienen van de projector door
aansluiting van een RS-232C seriële bedieningskabel (kruiskabel, los verkrijgbaar)
op de projector. (Zie bladzijde
22.)
Voorwaarden voor communicatie
Stel de seriële poort op de computer in overeenkomstig de tabel.
Signaalformaat: Voldoet aan RS-232C norm. Parity bit: Geen
Baud rate: 9.600 bps Stop bit: 1 bit
Datalengte: 8 bits Flow control: Geen
Basisformaat
Opdrachten van de computer worden in de volgende volgorde verzonden: opdracht,
parameter en return code. Nadat de projector de opdracht van de computer heeft
verwerkt, stuurt hij een responscode naar de computer.
Opdrachtformaat
C1 C2 C3 C4 P1 P2 P3 P4
Return code (0DH)
Viercijferige opdracht Parameter, viercijferig
Responscodeformaat
Normale respons Probleemrespons (communicatiefout of onjuiste opdracht)
OK
Return code (0DH)
ERR
Return code (0DH)
Info
Bij bediening van de projector met behulp van de RS-232C commando's van een computer, moet u
minimaal 30 seconden wachten nadat de stroom is ingeschakeld voordat u begint met het zenden
van de commando's.
Nadat een opdracht voor de ingangskeuze of beeldinstelling is verzonden en een “OK
responscode is ontvangen, kan de verwerking van de opdracht door de projector enige tijd duren.
Wanneer een tweede opdracht wordt verzonden terwijl de projector de eerste opdracht nog moet
verwerken, dan kan een “ERR” responscode het resultaat zijn. Probeer de tweede opdracht
nogmaals te verzenden wanneer dit gebeurt.
Als meer dan 1 code wordt verzonden, moet u elk commando pas versturen nadat de
antwoordcode voor het voorgaande commando is geverifi eerd.
“POWR????”, “TABN _ _ _ 1”, “TLPS _ _ _ 1”, “TPOW _ _ _ 1, “TLPN _ _ _ 1”, “TLTT _ _ _ 1”,
“TLTM _ _ _ 1, “TLTL _ _ _ 1, “TNAM _ _ _ 1, “MNRD _ _ _ 1”, “PJN0 _ _ _ 1”
− Wanneer de projector de hierboven genoemde speciale opdrachten ontvangt:
* Het beeldschermdisplay zal niet verdwijnen.
* De “Auto Power Off” timer zal niet worden teruggesteld.
− Er zijn speciale opdrachten beschikbaar voor toepassingen waarvoor constante polling nodig is.
Als er in de parameterkolom een onderstrepingsteken (_) staat, moet u een spatie invoeren.
Als er in de parameterkolom een sterretje (*) staat, vult u een waarde in binnen het bereik dat tussen
haakjes aangegeven staat onder UIT TE VOEREN BEDIENING.
Opmerking
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp PG-LW2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp PG-LW2000 in the language / languages: Dutch as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp PG-LW2000

Sharp PG-LW2000 User Manual - English - 75 pages

Sharp PG-LW2000 User Manual - German - 75 pages

Sharp PG-LW2000 User Manual - Italian - 75 pages

Sharp PG-LW2000 User Manual - Swedish - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info