216058
24
Zoom out
Zoom in
Previous page
1/35
Next page
-24
Instellen van de projector d.m.v. RS-232C of Telnet
Voer het nummer of symbool in van het item dat geselecteerd wordt op het “SETUP MENU”
(Instelmenu). Voer bij het instellen de in te stellen details in. Per maal wordt één item ingesteld
die aan het einde worden opgeslagen.
Ingestelde items
Voorbeeld: Bij het instellen van het IP adres
(veranderen van 192.168.150.2 naar 192.168.150.3)
TSETUP MENU
-----------------------------SETUP MENU----------------------------
[1]IP Address [2]Subnet Mask [3]Default Gateway
[4]User Name [5]Password
[6]RS-232C Baud Rate [7]Projector Name
[8]DHCP Client
[A]Advanced Setup [D]Disconnect All
[V]View All Setting [S]Save & Quit [Q]Quit Unchanged
setup>1
IP Address : 192.168.150.2
Please Enter : 192.168.150.3
(change)
—> 192.168.150.3
-----------------------------SETUP MENU----------------------------
[1]IP Address [2]Subnet Mask [3]Default Gateway
[4]User Name [5]Password
[6]RS-232C Baud Rate [7]Projector Name
[8]DHCP Client
[A]Advanced Setup [D]Disconnect All
[V]View All Setting [S]Save & Quit [Q]Quit Unchanged
setup>v
Model Name : XX-XXXX
Projector Name : XX-XXXX
MAC Address : XX:XX:XX:XX:XX:XX
DHCP Client : Disable
IP Address : 192.168.150.3
Subnet Mask : 255.255.255.0
Default Gateway : Not Used
RS-232C Baud Rate : 9600 bps
Password : Not Required
**********(Advanced Status)**********
Data Port : 10002
Accept IP Address : Accept All
Auto Logout Time : 5 minutes
Search Port : 5006
*1
*2
*3
Voer “1” (aantal in te stellen items) en druk
op de “Enter” knop.
Geef het huidige IP adres (*1) weer.
Voer het in te stellen IP adres in en druk op
de “Enter” knop.
Geef het IP adres (*2) na de wijziging weer.
Voer “v” in en druk op de “Enter” knop om
de detaillijst te controleren.
IP adres wordt veranderd (*3).
Het controleren van de lijst van ingestelde details
kan achterwege worden gelaten.
De ingestelde details zijn niet van kracht totdat
ze opgeslagen zijn (bladzijde
25).
Bij invoeren van een ongeldig nummer wordt
een foutmelding “Parameter Error!” (parameter
fout) weergegeven.
Opmerking
Bekijken van de lijst van
ingestelde details
([V]View All Setting)
TSETUP MENU
-----------------------------SETUP MENU----------------------------
[1]IP Address [2]Subnet Mask [3]Default Gateway
[4]User Name [5]Password
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup [D]Disconnect All
[V]View All Setting [S]Save & Quit [Q]Quit Unchanged
setup>v
Model Name : XX-XXXX
Projector Name : XX-XXXX
MAC Address : XX:XX:XX:XX:XX:XX
DHCP Client : Disable
IP Address : 192.168.150.2
Subnet Mask : 255.255.255.0
Default Gateway : Not Used
RS-232 Baud Rate : 9600 bps
Password : Not Required
**********(Advanced Status)**********
Data Port : 10002
Accept IP Address : Accept All
Auto Logout Time : 5 minutes
Search Port : 5006
*
Voer “v” in en druk op de “Enter” knop.
Geef alle instelwaarden weer(*).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp pg d3750w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp pg d3750w in the language / languages: Dutch as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info