678914

Sharp MX-8090N Manual

759
Zoom out
Zoom in
Previous page
1/792
Next page
7-162
SYSTEM SETTINGS►SYSTEM SETTINGS
Image Quality Adjustment
Collective Adjustment
Various devices mounted on the machine can be set.
Registration Adjustment
If colour shift occurs on the printed side when colour printing is performed, the print positions of the colours can be
adjusted to reduce colour shift.
Tap the [Execute] key.
Fusing Cleaning Mode
Use this function to clean the machine's fusing unit when dots or other dirt appear on the printed side of the paper. When
this function is executed, "V" printed paper is output and the fusing unit is cleaned.
MC Cleaning Mode
This machine periodically executes automatic cleaning and normally it is not necessary to execute this mode. Only in
case, however, that black lines appear on the printed paper, execute this mode.
PTC Cleaning Mode
If black lines or coloured lines appear even after you have cleaned the document glass, automatic document feeder and
main charger, execute this mode.
Black Letter/Black Line Width Adjustment
Adjust black text and the width of black lines. After using this function to perform adjustment, perform [System Settings]
- [Common Functions] - [Auto Colour Calibration (for Copy)] - [Auto Colour Calibration (for Print)].
Black Streak Reduction
Specify to use the black streak reduction or not.
The black streak reduction can be used for Scan Original, Copy, Image Send, and Scan to HDD functions.
If the black streak reduction is enabled, select any of the following options.
• Treat Thin Black Streaks: Use this setting to make thin black streaks less apparent. (Low level)
• Normal: Use this setting to make black streaks less apparent. (Medium level)
• Treat Up to Thick Black Streaks: Use this setting to make thick black streaks less apparent. (High level)
• Registration Adjustment and Fusing Cleaning Mode in [Collective Adjustment], all Common Functions, and removal of a
toner cartridge can only be executed in setting mode on the machine.
• Colour Profile Settings can only be configured on the Web page.
If improvement is not noticed after the first time you use the function, try executing the function again.
Do not use this function when no black lines appear. Using this function under the normal condition may cause deterioration
of the cleaner.
Increasing the level of black streak treatment may result in faint text and poor reproduction of lines.
… 759 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp MX-8090N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp MX-8090N in the language / languages: English as an attachment in your email.

The manual is 20,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp MX-8090N

Sharp MX-8090N User Manual - German - 792 pages

Sharp MX-8090N User Manual - Dutch - 792 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info