649302
873
Zoom out
Zoom in
Previous page
1/915
Next page
7-173
SYSTEM SETTINGSSYSTEM SETTINGS
Common Functions
Auto Color Calibration (for Copy)
Auto Color Calibration (for Print)
Copy Calibration by Screen
Printer Calibration by Screen
Performs automatic color correction when the color is off.
For copying, adjust with [Auto Color Calibration (for Copy)]. For printing, adjust with [Auto Color Calibration (for Print)].
You can use [Copy Calibration by Screen] and [Printer Calibration by Screen] to perform even higher precision
adjustment of each mode.
The machine prints a test patch, the test patch is scanned, and the color is automatically corrected.
After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic
calibration.
Follow the instructions in the message to perform color adjustment.
Density Smoothing Adjustment
If uneven density occurs in a copy and others, use this function to smooth the density.
The uneven density is automatically corrected by scanning a test patch that you print.
After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic
adjustment.
Follow the instructions in the message to perform density smoothing.
If there are no problems after adjustment, perform "Auto Color Calibration (for Copy)" and "Auto Color Calibration (for
Print)".
To return the adjusted values to their factory default state, tap [Return Density Smoothing Adjustment Value to Defaults].
If you tapped [Return to the Defaults], perform adjustment of the density that you want to readjust (medium density in the
default mode).
Remove Toner Cartridge
Normally toner cartridges cannot be removed. However, when a cartridge runs out of toner, the cartridge is
automatically ejected to allow removal. If you need to remove a cartridge that still has toner, you can manually eject and
remove the cartridge.
Select the toner cartridge to be ejected and tap the [Execute] key. The selected cartridge is ejected to allow removal.
Before executing Auto Color Calibration, check to see if the registration adjustment is correct.
If the registration adjustment is not correct, perform "Registration Adjustment."
If the color is still off after performing Auto Color Calibration, repeating Auto Color Calibration once again may improve the
color.
If the density is still uneven after you have performed density smoothing, repeating the procedure may provide improvement.
To repeat density smoothing, you can either start from the beginning, or press the [Back] button after performing smoothing
the first time.
To remove the toner cartridge, use the operation panel on the machine. You cannot perform the cartridge removal operation
on the web screen.
873


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp MX-4050N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp MX-4050N in the language / languages: English as an attachment in your email.

The manual is 25,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp MX-4050N

Sharp MX-4050N User Manual - German - 944 pages

Sharp MX-4050N User Manual - Dutch - 944 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info