＞
＜
Troubleshooting
If You Suspect a Problem
General
What if Where to check Reference page
Input change does not allow selection Is the input skip set to "No"? 5-23
The power turns off automatically Check if the Monitor is in the mode where it is turned off automatically. ―
The POWER lamp does not go off at the press of the
power button on the Monitor
If the power button setting is set to "Mode1", the power turns off at the press of the power button
on the Monitor, but the POWER lamp stays lit. The lamp is lit red (standby).
3-4
8K input
What if Where to check Reference page
Not shown as 4320p
Check if four HDMI cables are inserted into A to D of INPUT 7.
Check the resolution of the output device.
5-1 to 5-3
No video appears Any connections to HDMI 1 to 4? 5-1 to 5-2
No sound is coming out
Go to "INPUT7 audio select" where you should select the audio input terminal used. The
compatible format is Linear PCM only.
5-4
If any problem persists after you try the corresponding solution above, be sure to unplug the power plug and then contact your local distributor.
7-7
