13343
64
Zoom out
Zoom in
Previous page
1/69
Next page
E63
EnglishDeutschFrançaisItalianoEspañolEnglish
Problem
There is no sound from the TV speakers.
There is no sound from the audio
output terminals.
There is no picture.
(POWER LED is lit orange.)
The image appears distorted.
AV5 mode cannot be selected.
PC DIGITAL mode cannot be
selected.
The image does not appear properly
in AV5 (DVI) or PC (digital) mode.
The image does not appear
properly in AV4 (HDMI) mode.
What to Check
- Adjust the volume. (Page E30)
- Are the audio cables properly connected?
(Pages E21 to E24 and E26)
- Did you press the MUTE button? (Page E31)
- No sound can be heard from the TV speakers while
headphones are connected.
- When "Output Select" is set to "Variable2" in the Option menu,
no sound can be heard from the TV speakers.
(Page E45 or E52)
- No sound can be heard from the TV speakers while the TV is in
power-saving mode.
- When headphones are connected, sound can be output from
these terminals only when "Fixed" is selected. (Page E13)
-
Is the TV properly connected to the computer? (Pages E25 and E26)
- Is the computer turned on?
- Is the PC signal input terminal (analog or digital) properly
selected? (Page E29)
- Does the computer's signal timing correspond to TV
specifications? (Page E67)
- Is the computer in power-saving mode?
Try pressing a key on the keyboard or moving the mouse.
- Does the computer's signal timing correspond to TV
specifications? (Page E67)
- If you are using the analog signal, perform automatic screen
adjustment. (Page E46)
- Change the Vsync frequency (refresh rate) on the computer you
are using to a low value if possible. (Page E67)
- Have you switched to the display mode appropriate for the
connected equipment? (Page E29)
To select AV5 mode, set "DVI Select" to "AV" beforehand using
the Option menu. (Pages E42 and E45)
To select PC DIGITAL mode, set "DVI Select" to "PC" beforehand
using the Option menu. (Pages E47 and E52)
- Have you switched to the display mode appropriate for the
connected equipment? (Page E29)
- Turn off power to both the TV and the connected AV equipment,
or both the TV and the connected computer.
Reselect "DVI Select" setting following steps 1 through 7 on
page E24 (for "AV") or page E26 (for "PC").
Try turning off/on the TV and the connected AV equipment in the
following order:
- Turn off the AV equipment.
- Turn off the TV and turn it on after waiting at least 5 seconds.
- Turn on the AV equipment.
Troubleshooting
02_LD-26SH3U_gb_02.P65 5/23/2005, 1:45 PM63
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LD-26SH3U Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LD-26SH3U Operation Manual in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info