13343

Sharp LD-26SH3U Operation Manual Manual

27
Zoom out
Zoom in
Previous page
1/69
Next page
E26
Digital connection
Connect the separately-sold digital signal cable
(model name: NL-C04J) to the digital RGB output
terminal of the computer.
See page E10 for information on removing/
replacing the terminal cover.
- The TV has an input terminal for connecting to a
computer with a DVI-compatible output terminal
(DVI-D 24 pin or DVI-I 29 pin).
(Depending on the type of computer to be
connected, the display may not work correctly.)
- Paying attention to the connector direction, firmly
insert the signal cable straight into the
connector, and then tighten the screws at both
ends.
Connecting the TV to a computer
Notes:
- The DVI input terminal is used for either AV
equipment or a computer. Before using this
terminal, you need to set "DVI Select" to "PC" in
the Option menu. The factory setting is "AV". (See
page E45 or E52.) After making the connection,
follow the procedure below. (Make sure that the
connected computer is switched off.)
1. Press the POWER button to turn on the TV.
(See page E28.)
2. Press the MENU button to display the MENU
screen.
(See pages E42 and E45, or E47 and E52 for
information on using the menus.)
3. Select the Option menu.
4. Set "DVI Select" to "PC".
5. Press the MENU or EXIT button to exit the
screen.
6. Press the INPUT or PC button to select
"PC DIGITAL" as the display mode.
(See page E29 for information on switching
display modes.)
7. Turn on power to the connected computer.
- If the image does not appear properly, turn off
power to both the TV and the connected
computer. Again, set "DVI Select" to "PC"
following steps 1 through 7 above.
Connecting the audio cable
Connect the supplied PC audio cable to the audio
output terminal of the computer.
See page E10 for information on removing/
replacing the terminal cover.
DVI input terminal
(DVI-D 24 pin)
Digital signal cable (separately-sold)
Digital RGB
output terminal
(DVI-D 24 pin or
DVI-I 29 pin)
PC audio input terminal
Audio output
terminal
PC audio cable (supplied)
Computer
Computer
01_LD-26SH3U_gb_01.P65 5/23/2005, 1:44 PM26
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LD-26SH3U Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LD-26SH3U Operation Manual in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info