Manual Sharp LCM3700 (page 60 of 73) (English, German, French, Spanish)

24937

Zoom out

Zoom in

1/73

Settings and

Adjustments

» PIN+xxxx (“xxxx” is the current PIN.)

This command temporarily releases current lock.

“+” indicates repeater control for the PINP command. (

Repeater control)

» PCLRxxxx (“xxxx” is the current PIN.)

It reverts to the state where no PIN has been set.

This is the same as “PIN Clear” under “Control Lock” on the “Setup” menu. (“Permanent unlock-

ing”)

» PCL+xxxx (“xxxx” is the current PIN.)

It reverts to the state where there is no PIN.

“+” indicates repeater control for the PCLR command.

Permanent Control lock deactivation (RS-232C)

When a single monitor is connected, use “PCLRxxxx” (“xxxx” is the current PIN.)

When multiple monitors are connected, use “PCLR+xxxx”.

If the “RS-232C” function is locked, the IDSL and IDLK commands cannot be used.

[Example: 1] Disabling remote control operations

1) From the menu screen, select “Control Lock” from “Setup”.

2) Go to “Lock Items”, then “Remote”, and select “Lock”.

Note: If you exit the menu at this point, the locking will not occur.

3) Go to PIN input, and enter a 4-digit PIN.

4) After PIN input, the set locks will become effective when you close the menu.

[Example: 2] Disabling remote control, monitor buttons and power operations

1) From the menu screen, select “Control Lock” from “Setup”.

2) Go to “Lock Items”, and set “Remote”, “Buttons” and “Power” to “Lock”.

Note: If you exit the menu at this point, the locking will not occur.

3) Go to PIN input screen and enter 4-digit PIN.

4) After PIN input, the set locks will become effective when you close the menu.

[Example: 3] Disabling menu display (RS-232C single connection)

Note: The returned value assumes that no ID has been set.

PCLRxxxx ←(“xxxx” is the current PIN. “xxxx” is not necessary if no PIN has been set.)

LMNU0001 ←Locks menu display.

PSETxxxx ←(“xxxx” is new PIN.)

Settings and Adjustments (Continued)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LCM3700 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 4,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp LCM3700 Manual

Product: