24937
51
Zoom out
Zoom in
Previous page
1/73
Next page
US
50
PC Operation (Continued)
Other control options
ID NUMBER ID NO. SETTING IDST W 0 - 255 It sets the monitor's ID number.
R 0 - 255 It returns the monitor's ID number.
IDSL W 1 - 255
Sets a monitor ID number. This ID number is only effective for the command
immediately after this command.
0 Clears the ID number if one has been designated.
IDLK W 1 - 255
Sets a monitor ID number. This ID number is effective for the next and all
subsequent commands after this command.
0 Clears the ID number if one has been designated.
ID CHECK IDCK W
Displays selected ID number and the monitor's own ID number on the screen.
CONTROL LOCK MENU DISPLAY LMNU WR Normal (Menu Display is available)
1 1 Menu Display is not available.
REMOTE CONTROL LREM WR Normal (Operational)
1 1 Disabled
CONTROL BUTTONS LBTN WR Normal (Operational)
1 1 Disabled
POWER LPOW WR Normal (Operational)
1 1 Disabled
RS232C LCOM WR Normal (Operational)
1 1 Disabled
PIN SET PIN PSET W 4 digits Sets PIN (Activates lock function)
PSE+ W 4 digits Sets PIN: for repeater control
INPUT PIN PINP W 4 digits Input of set PIN (Temporary unlock)
PIN+ W 4 digits Input of set PIN: for repeater control
CLEAR PIN PCLR W 4 digits Initializes PIN
PCL+ W 4 digits Initializes PIN: for repeater control
POWER-ON METHOD, ETC. MAX VOLUME MVOL WR 1 - 60 1 - 60 Maximum volume limit. Only displays volume in numbers when set to other than 60.
FIX VOLUME FVOL WR 0 0 Off
1 1 Fixes volume at a constant value
OSD SETTING ODSP WR 0 0 Normal
1 1 No OSD is displayed.
DISPLAY BOOT FINP WR 0 0 Normal
OPTION 1 1 Starts with INPUT1 + [AV] input selection
2 2 Starts with INPUT1 + [Y/C] input selection
4 4 Starts with INPUT2. Returns ERR if INPUT2 selection is "Output"
5 5 Starts with INPUT3.
6 6 Starts with PC + [Analog] input selection
7 7 Starts with PC + [Digital] input selection
11 11 Starts with INPUT1 + [AV] input selection, and remains fixed
12 12 Starts with INPUT1 + [Y/C] input selection, and remains fixed
14 14
Starts with INPUT2, and remains fixed. Returns ERR if INPUT2 selection is "Output".
15 15 Starts with INPUT3, and remains fixed
16 16 Starts with PC + [Analog] input selection, and remains fixed
17 17 Starts with PC + [Digital] input selection, and remains fixed
SOUND INPUT SELECT SNDS WR 0 0 Normal
1 1 Uses INPUT1 audio as fixed source
2 2 Uses INPUT2 audio as fixed source
COVR WR 0 0 Detached
1 1 Attached
PANEL PROTECTION COVER
ID NO. SETTING
(ONCE)
ID NO. SETTING
(SUBSEQUENT)
Maximum volume limit. Only displays volume in numbers when set to other than 60.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LCM3700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LCM3700 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info