33851
59
Zoom out
Zoom in
Previous page
1/102
Next page
58
Connecting D-VHS decks/AV-HDD
recorder/Blu-ray Disc recorder (i.LINK
connection)
Using external equipment
About i.LINK
i.LINK is an interface connection using a serial
transfer system and is able to transfer multimedia
data, such as digital images and digital sound,
between devices that have i.LINK terminals.
i.LINK is a term defined in the IEEE1394 (Institute of
Electrical and Electronics Engineers) standard.
Currently, the transfer speeds are at 100 Mbps, 200
Mbps and 400 Mbps, each of them expressed as
S100, S200 and S400 respectively. On this TV, the
maximum speed is 400 Mbps.
i. LINK devices that can be connected to this
TV.
Only D-VHS decks, AV-HDD recorders and Blu-ray
Disc recorders can be connected to this TV via
i.LINK. Other devices such as DVD recorders, digital
video cameras, computers or computer peripheral
devices do not meet the specifications for this TV
and therefore cannot be connected via i.LINK.
Even for the types of i.LINK device mentioned above,
device recognition, control, recording and playback
operations may not be possible on some devices.
Materials that can be recorded with the i.LINK
Only digital programs can be recorded by i.LINK
devices connected to this TV using the i.LINK. i.LINK
recording is not compatible with analog broadcasts
or external input signals (INPUT terminals 1 through
5).
i.LINK connection
Only an i.LINK cable is
needed to connect the TV
to i.LINK devices.
(VIDEO, S-VIDEO, and
AUDIO terminals need not
be connected.)
i.LINK device
Connecting two or more i.LINK devices
Up to 16 i.LINK devices can be connected using a
daisy-chain connection with i.LINK cables.
When 3 or more i.LINK devices are connected,
branch connection can be used. With branch
connections, up to 62 i.LINK devices can be
connected.
Cautions regarding i.LINK connection
Please use S400 type i.LINK cables.
Some i.LINK devices may not relay data if their power
is off. In this case the device should be connected
at the end of any series of connections.
This TV can relay data during power off, by selecting
“Active” in the “Standby Mode” option in “i.LINK
Setup”. (See Page 59.)
Please do NOT use a loop connection as shown in
the diagram.
When using the i.LINK, do not turn off the power of,
or pull the cable from i.LINK devices, even if that
i.LINK devices is not in use. This may affect the
picture and the sound from an i.LINK device in use.
If devices such as a DVD recorders, digital video
cameras, computers and computer peripheral
devices which are not compatible with this TV, are
connected to the TV using i.LINK, other i.LINK
connections may be disrupted.
When device recognition, control, recording or play
back, on an i.LINK connected device does not
function correctly, correct operation may be restored
by disconnecting and reconnecting the i.LINK cable.
When connecting multiple i.LINK devices, depending
on the specifications and the interoperability of the
connected devices, their operation may not be stable.
In that case, disconnecting all devices not in use
and changing the method of connection may result
in stable operation.
NOTE
Please make sure the
shapes of the terminal
and the plug match,
and insert the plug into
the terminal straight,
not on an angle.
• Use either one of the
terminals. These two
terminals do not differ
in quality or function.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC26D5U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC26D5U in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info