475391
7
Zoom out
Zoom in
Previous page
1/74
Next page
5
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord.
Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the TV.
Do not remove the stand from the TV unless using a
wall mount bracket to mount it.
1 Confirm that there are twelve screws (eight long
screws and four short screws) supplied with the
stand unit.
2
1
Set the supporting post for the stand unit
onto the polystyrene foam.
2
Attach the stand base to the supporting
post.
3
Insert and tighten the eight screws into the
eight holes on the bottom of the stand base.
Hold the stand unit securely with one hand, and
then tighten the screws.
Stand base Long screws
TV front
Supporting post
3 Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
Instead of using a soft cushion, the cardboard box
that the TV is packed in can be assembled and
used as a work table (refer to the instructions on the
box to assemble the work table).
Soft cushion
4 Insert and tighten the four screws into the four
holes on the rear of the TV.
Short screws
NOTE
To detach the stand unit, perform the steps in reverse
order.
A screwdriver is not supplied with this product.
In the installation procedure, be careful not to catch
your fingers between the TV set and the floor.
Preparation
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-80LE645E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-80LE645E in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-80LE645E

Sharp LC-80LE645E User Manual - Dutch - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info