525798
17
Zoom out
Zoom in
Previous page
1/94
Next page
15
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Confirm the following before turning on
the power
E
Is the antenna cable connected?
E
Is the AC cord plugged in?
E
Is the MAIN POWER switch turned on (;)?
Important information:
Satellite services are only available for the 857 model
series.
1 Press a on the TV.
The initial auto installation wizard appears.
2 Setting the OSD language.
Press a/b/c/d to select the desired language, and
then press ;.
3 Selecting the location of the TV.
HOME
STORE
Press c/d to select where you will use this TV, and
then press ;.
The confirmation screen pops up only when
selecting STORE. Press c/d to select Yes or
No.
HOME: STANDARD will be the default value for
the AV mode setting.
STORE: DYNAMIC (Fixed) will be the default
value for the AV mode setting. If the AV mode
is changed, the TV will automatically switch back
to DYNAMIC (Fixed) when there is no operation
using the TV or remote control unit for 30 minutes.
STORE: A demonstration image will be displayed
after initial auto installation is completed. If you
have chosen STORE by mistake, go to TV
Menu > Setup > View setting > Reset >
select HOME again.
4 Setting the country.
Press a/b/c/d to select your country or area, and
then press ;.
This setting screen only appears during the initial
auto installation.
NOTE
Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
5 Setting the PIN.
1 Press c/d to select Yes, and then press
;.
When No is selected, the PIN code setting is
skipped.
2
Enter a four-digit number as a PIN using the
09 buttons.
3 Enter the same four-digit number as in step
2 to confirm.
4 Press ;.
NOTE
When France or Italy is selected in the country
setting, the PIN code setting cannot be skipped.
0000 cannot be set as the PIN code.
When the PIN code setting is skipped, the default PIN
code (1234) will automatically be set.
To change the PIN setting, refer to Individual setting
PIN (Page 44). To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 79).
6 Starting channel search.
Digital search
Analogue search
Satellite search
Press a/b to select Digital search, Analogue
search or Satellite search, and then press ;.
(857 series only) After performing Digital search
or Analogue search, the screen switches to the
Satellite search setting. You should then execute
Yes if you want to search for satellite channels.
To watch both digital broadcasts and analogue
broadcasts, you should perform Digital search or
Analogue search from Auto installation under
the Setup menu (Page 41).
When you select Satellite search, only satellite
broadcasts will be searched.
If you want to search for more broadcasts, execute
Additional search from the Programme setup
menu (Pages 41_43).
NOTE
If you turn off the power on the TV while performing a
channel search, the initial auto installation wizard will
not appear. The auto installation function allows you
to execute the installation again from TV Menu >
Setup > View setting (Page 41).
The initial auto installation wizard will abort if you leave
the TV unattended for 30 minutes before searching for
channels.
When Italy or France is selected in the country
setting, the default age restriction value is set to 18.
Initial auto installation
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-70LE857E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-70LE857E in the language / languages: English as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-70LE857E

Sharp LC-70LE857E User Manual - English - 94 pages

Sharp LC-70LE857E User Manual - German - 94 pages

Sharp LC-70LE857E User Manual - Dutch - 94 pages

Sharp LC-70LE857E User Manual - Dutch - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info