525798
55
Zoom out
Zoom in
Previous page
1/94
Next page
53
USB-recording
You can record the programme you are watching to
the registered USB HDD.
Starting USB-recording
Press REC E.
The TV starts USB-recording.
NOTE
You can also operate from the control panel by pressing
CONTROL.
You cannot switch the channel or the input source
during USB-recording.
During USB-recording, the TV cannot display photos
or play music from the internet, Home network, or USB
storages.
You may not record programmes.
Completing USB-recording
1 Press REC STOP H.
The screen prompt pops up.
2 Press c/d to select “Yes”, and then press ;.
USB-recording has completed.
NOTE
You can also operate from the control panel by pressing
CONTROL.
USB-recording timer setting
You can set the USB-recording timer setting for
programmes you want to record.
NOTE
To prevent the first part of the programme from being
cut, start recording the programme a few seconds
earlier than time set to start recording.
When recording/viewing timer settings are set
continuously for multiple programmes, schedule the
recording of the previous programme to end earlier than
the end of the programme itself. Recording/viewing
timer setting of the next programme will start after that.
A message will be displayed when the scheduled time
overlaps with an existing schedule. Make changes in
accordance with the on-screen instructions.
It is not possible to newly schedule a recording that
overlaps with a timer setting that is currently running
(recording). When urgent setting of a schedule is
desired, stop recording before scheduling.
A combined total of 16 timer settings (“Watch” and
“Record”) can be set.
A CAM (CI Plus v1.3) PIN code may be necessary
to record broadcasts scrambled due to parental
rate settings. When a CAM PIN code is required for
recording a programme, it is necessary to enter the
CAM PIN code in advance (Page 12).
If a CAM PIN code is not entered or is entered
incorrectly, the programme will not be able to be
recorded/played back.
EPG timer setup
You can select the programme you want to record
and set the timer setting with EPG (Pages 23 and 24).
Manual timer setting
“Manual timer setting” enables you to set date,
recording start/stop time and channel.
1 Press EPG.
2 Press B to display the timer list.
3 Press B again to display the “Manual timer
setting” screen.
4 Set date, recording start/stop time and channel.
5 Press c/d to select “Record”, and then press
;.
A confirmation screen will be displayed for the timer
setting.
6 Press c/d to select “Yes”, and then press ;.
Manual clock setting
When the TV cannot receive the time via digital
broadcast, perform “Manual timer setting” after
setting the clock.
Go to “TV Menu” > “View setting” >
“Individual setting” > “Clock setup” > “Time
adjustment”.
NOTE
You cannot set the manual clock setting during USB-
recording.
Timer list
A list of programmes scheduled for recording can be
displayed.
1 Press EPG.
2 Press B to display the timer list.
USB-recording playback
To playback the recorded programmes, open
the USB-recording list and select the desired
programme.
1 Go to “HOME” > “Record list”.
2 Press “OK” button.
• Press H to return the scene that is broadcasting.
NOTE
You may not playback recorded programmes when the
programme provider restricts or completely prevents
recording or later watching of an encoded programme.
Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 12).
Other useful features
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-70LE857E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-70LE857E in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-70LE857E

Sharp LC-70LE857E User Manual - English - 94 pages

Sharp LC-70LE857E User Manual - German - 94 pages

Sharp LC-70LE857E User Manual - Dutch - 94 pages

Sharp LC-70LE857E User Manual - Dutch - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info